PDA

View Full Version : what is problem Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00) ??????????????



alkesh
07-07-2012, 08:23 AM
User stop
Pinouts are not fonud!
Detecting rx and tx...
Vcc: 12
Gnd: 6 10
Detection initiated, connect the phone and power on it...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
User stop
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: 12
Gnd: 6 10
Detection initiated...
Found: D+ = 3, D- = 1
Detection D+/D- with 3.36 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Detection completed.
Detection initiated...
Vcc: 12
Gnd: 6 10
Analyzing D+ and D-...
D+ = 3, D- = 1
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00)


Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
>>Please change Boot or reduce Baudrate, try it again.

.::EXTREME::.
07-07-2012, 08:35 AM
we have some problem in READINFO on some SPD phones

but you can do format,readflash,write flash etc to almost all SPD phones

Change boot and try your job.


post here scrreen shot so i can check error.



WHATS YOUR FONE STATUS??

Qaisar Mahmood
07-07-2012, 08:44 AM
go to SPD tab

connect phone

select Boot 6600Lx Series (USB /COM) or Other boot

select USB (D+/ D-)

select operation you want ( read flash. write flash. Format)

and click run

try and post result.

Br,


Volcano Box Ahead Off All.

alkesh
07-07-2012, 10:29 AM
ok i tray and post

kush
10-29-2013, 12:25 PM
what can i do micromax a62 not connecting to my volacano some budy help me

Connection successful,connected state!
Version: V3.8
SN:099-099-619
Port:COM3
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM1 COM3
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Set the Pinouts failed,please reconnect and try again!

Waiting for phone's response, press the Power on the phone
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Set the Pinouts failed,please reconnect and try again!
Reset USB device and search it...
Time-out, try again, or re-plug your phone, or re-defined pinouts.
Reset USB device and search it...
Time-out, try again, or re-plug your phone, or re-defined pinouts.
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
>>Set the Pinouts failed,please reconnect and try again!