PDA

View Full Version : SAMSUNG S3(I9300)&GALAXY NOTE 2(N7100)Boot Reapir



SHIJILFONOTLY
03-04-2014, 03:57 AM
1)DOWNLOAD THIS FILE
2)EXTRACT ON DESKTOP
3)TAKE ONE MICRO SD CARD ALSO ONE CARD READER(SD MUST 2GB OR ABOVE)
4)INSERT THE CARD READER HOLDER THEN CONNECT USB PORT
5)OPEN THE Diskdump2.exe
6)SELECT GENERIC STORAGE DEVICE
http://img819.imageshack.us/img819/2376/iuvf.jpg
7)AFTER THE SELECTION NEW WINDOWN APPER
8)USE WRITE BY SCRIPTS OPTION(4th Option)
http://img197.imageshack.us/img197/5159/7tib.jpg
9)WAIT FOR THE FINISHING
DONE YOU SUCESSFULY MAKE A SAMSUNG BOOT CARD
http://img94.imageshack.us/img94/5692/73bd.jpg

DOWNLOAD (http://www.4shared.com/rar/MebExtx9/SAMSUNG_S3_BOOT_CARD_MAKER.html)



Dear Friends This Models(i9300&N7100) Boot Repair Step One i Already Posted Plz Check This Link
1)First Create Boot Card
2)Download teraterm-4.78
teraterm-4.78 (http://www.mediafire.com/?cuhhw94a664wa27)
3)Connect Spt Box Also Take One Micro Uart Cable
4)Open teraterm-4.78 (look the picture)
http://imageshack.us/a/img6/1245/uvei.jpg
Go To Device Manager Check Spt Port Number
Open teraterm-4.78,Now New Window Apper.
Select Spt Serial Port (look the picture)
http://img89.imageshack.us/img89/8981/qdou.jpg
After Select The Serial Port Press Ok Button
Next Go To Setup Click Serial Port Option
Select Baud Rate 115200 Then Press Ok Button
http://img10.imageshack.us/img10/6893/mt7t.jpg
http://img196.imageshack.us/img196/387/3mon.jpg
Insert Boot Card To Phone
Connect Spt Via Uart Cable
Then Insert Battery Next Hold Power Button Wait For Minutes

After The Boot Repair Phone Must Trun On But Just For Light Nothing Show The Display.Dont Worry Put The Phone Download Mode Now Phone Enter Download Like This Picture
http://img266.imageshack.us/img266/6950/yw8n.jpg
http://img823.imageshack.us/img823/9168/wd4h.jpg
open spt software use any version flash file.but remmber must use repartition option then flash it
are you used odin software must use mx pit file&repartition option
after the flash phone must powered but imei is damaged just rebuild imei via z3x.

any one faced the error while boot repair
this casue not software bad EMMC
this phone cant repair with any jtag,must change the EMMC:D

[B]THIS SOLUTION FROM SAMSUNG OFFICIAL TEAM[/B

hirelaptops
03-18-2019, 02:09 PM
Thanks for sharing this informative post.

vijhoni62
05-02-2019, 11:02 AM
This site is very interesting. Thank you,