View Full Version : Amazon kindle fire hd 8.9 JTAG via eMMC support <<FIRST IN THE WORLD>>

05-09-2015, 12:48 PM
Amazon Kindle Fire HD 8.9 [3HT7G] (Read/Write) Supported - First In the World

Z3X EasyJtag Software ver.
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: xxxxxxxxxxxxxxxxx, ,FW Ver.: 01.50
CMD Pullup Level:1918 mV
CMD Active Level:2124 mV
eMMC Device Information
EMMC CID : 1501004D42473447410043D968AFAFA8
EMMC CSD : D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 10/2012 Rev.0x0
EMMC NAME: MBG4GA , S/N: 1138321583
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: MBG4GA_1138321583_20141101_2233.extcsd
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: F9F21FFF-A8D4-5F0E-9746-594869AEC34E
Warning: Entries Count = 128
MMCBLK0P0 (XLOADER) Range: [0X20000,0X3FE00] ,Len: 20000
MMCBLK0P1 (BOOTLOADER) Range: [0X40000,0X7FE00] ,Len: 40000
MMCBLK0P2 (IDME) Range: [0X80000,0X8FE00] ,Len: 10000
MMCBLK0P3 (CRYPTO) Range: [0X90000,0X93E00] ,Len: 4000
MMCBLK0P4 (MISC) Range: [0X94000,0X94600] ,Len: 800
MMCBLK0P5 (DKERNEL) Range: [0X100000,0XAFFE00] ,Len: A00000
MMCBLK0P6 (DFS) Range: [0XB00000,0X4AFFE00] ,Len: 4000000
MMCBLK0P7 (EFS) Range: [0X4B00000,0X5AFFE00] ,Len: 1000000
MMCBLK0P8 (RECOVERY) Range: [0X5B00000,0X62FFE00] ,Len: 800000
MMCBLK0P9 (BOOT) Range: [0X6300000,0X6AFFE00] ,Len: 800000
MMCBLK0P10 (SYSTEM) Range: [0X6B00000,0X3E0FFE00] ,Len: 37600000
MMCBLK0P11 (CACHE) Range: [0X3E100000,0X66AFFE00] ,Len: 28A00000
MMCBLK0P12 (USERDATA) Range: [0X66B00000,0X747BFFE00] ,Len: 6E1100000
Done...Presets has been updated...

Z3X EasyJtag Software ver.
Skip loading eMMC Addon Firmware
CMD Pullup Level:1918 mV
CMD Active Level:2124 mV
Input file : C:\Users\AMAN\Pictures\wetransfer-1c841c\bootloader.img
Writing 000000040000 bytes to 00040000 ...ROM1 (USER ROM)
Write Speed: 199 kB/s
Done !!!



Steps :
1. Click “detect Emmc card” also check box select “read soft partition”
2. If successfully detect then go to “preset”
3. Select partition table “bootloader”
4. Then go “write emmc card” select dump file in “bootloader.zip” [extract ]
5. Follow this steps same for “recovery” , “boot”

Dump file link Here

https://www.mediafire.com/folder/877...ISP_(Z3X_JTAG) (https://www.mediafire.com/folder/877gdq664q8lg/AMAZON_KINDLE_8.9_ISP_%28Z3X_JTAG%29)

Success picture


also follow me on
https://www.facebook.com/pages/JTAG-...37355396302392 (https://www.facebook.com/pages/JTAG-Service-INDIA/737355396302392)
https://plus.google.com/u/0/communit...35484656385181 (https://plus.google.com/u/0/communities/101853735484656385181)

http://forum.gsmhosting.com/vbb/images/buttons/report.gif (http://forum.gsmhosting.com/vbb/report.php?p=10745303)
http://forum.gsmhosting.com/vbb/images/buttons/quote.gif (http://forum.gsmhosting.com/vbb/newreply.php?do=newreply&p=10745303)