View Full Version : Moto G,E Moto G(2nd gen)Moto G LTE Moto X Moto X (2nd gen) Firmware + Flashing guide

05-13-2015, 08:01 AM
Moto G & E Moto G(2nd gen) Moto G LTE Moto X Moto X (2nd gen) Firmware + Flashing guide


Note: Use mfastboot command instead of normal fastboot command
Ex: mfastboot flash boot boot.img

Downloads Required:

Download & install adb fastboot driver Here (http://d-h.st/IRd)

Motorola Driver (https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481)

Mfastboot driver (http://d-h.st/xVQ)

Firmware Download Here

Alternate Download link here (http://motofirmware.com/)

Note: Files with _umtsds in their names are meant for Dual Sim variants only.

Moto G (XT939G, XT1008, XT1031, XT1032, XT1033, XT1034) (http://sbf.droid-developers.org/phone.php?device=14)

Moto G 2nd Gen (XT1063 / XT1064 / XT1068 / XT1069) (http://sbf.droid-developers.org/phone.php?device=36)

Moto G LTE (XT1039 / XT1040 / XT1045) (http://sbf.droid-developers.org/phone.php?device=35)

Moto X (XT1049, XT1050, XT1052, XT1053, XT1055, XT1056, XT1058, XT1060) (http://sbf.droid-developers.org/phone.php?device=0)

Moto X 2nd Gen (XT1092 / XT1097) (http://sbf.droid-developers.org/phone.php?device=37)

Moto E (XT1021, XT1022, XT1025) (http://sbf.droid-developers.org/phone.php?device=34)

Flashing Guide

Method 1

Download the necessary Firmware File and extract it

Enable USB Debugging Mode. Go-to Settings > Developers Option and Tick the USB debugging

Power Off your device and Open in Bootloader mode.Press nd hold Power + Volume Down button till yu see sme text on screen


Now Open the folder where yu hav extracted the Firmware files nd open cmd there. Hold Shift Key and Right Click anywhere in the folder then Click Open Command Prompt Here

If yur Firmware File has tar.gz extension,

Den type below givn cmmd

flashall.bat /eu

Wait for the Firmware files to be flashed on yur device den it vil boot

Now if your Firmware files have xml.zip extension extract nd flash via fastboot

Type Below given cmmds to flash the device

Example For Moto G

mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot

After al done yur phone will reboot automatically

Method 2

Moto X Flashing via RSD Lite

Download RSD Lite (http://d-h.st/wJh)

extract the downloaded firmware nd find a file with .XML extension. Right click on this file nd select Open with..nd then open it using Notepad or any XML editor. Now find the below given string and delete it.

<step operation="getvar" var="max-download-size" />

Save the changes

Cnnt yur mob in bootloader mode(fastboot mode)

Run Rsd lite there select the firmware

Press start


Wait till the firmware is flashed and when it is complete, your phone will reboot

02-01-2021, 01:13 AM
Ḿnh rất thích bài viết này, thật sự rất hữu ích và thú vị, hy vọng bạn có thể viết thêm nhiều bài hơn, ḿnh rất muốn đọc thêm.

Xem thêm: hướng dẫn đăng kư sàn Kucoin (https://kiemtien.com/huong-dan-dang-ky-san-kucoin/)