PDA

View Full Version : [VOLCANO BOX] Problems and Solutions !



GPGIndustries
03-15-2012, 07:28 AM
http://www.gpgdragonsupport.com/ftppro/Banners2012/volcano/2012-03-15-volcano-706.jpg

GPGIndustries
03-15-2012, 07:38 AM
http://www.gpgdragonsupport.com/ftppro/Banners2012/volcano/2012-03-15-Volcano-how-to-get-the-chip-info-706.jpg

manoju
03-16-2012, 06:23 AM
this method not warking

a2zworld
03-22-2012, 06:02 AM
working brooooo

ABDULMANAN
03-22-2012, 07:55 AM
how i find mtk usb pin and how i find spd rx tx

zayyan08
03-26-2012, 02:15 AM
working for mtk not working for spd

randello
03-26-2012, 07:59 AM
nice post sir ., thanks....

supertelecom
03-27-2012, 12:37 PM
how can i register the volcano box ?
plez help me bro,

mujahid
03-27-2012, 01:45 PM
after readflash file is not getting save volcano is getting close automatically mobile brand is [mstar cpu yxtel c6] plz help me sir

alikhan007
03-29-2012, 06:58 AM
it is ur problem bro i tested many these kinds of sets and working download new update

mujahid
03-29-2012, 09:05 AM
after read flash file save option is opening but am not able to change name coz its getting hang and then volcano is getting close what is this problem plz help me

zaintech
03-31-2012, 02:51 PM
valcano box is not detected .

.::EXTREME::.
03-31-2012, 03:51 PM
valcano box is not detected .

hi ..

make a new thread, so that we can solve your problem...

pls post screen shots for quick solutions..

cdhermandher
04-01-2012, 01:57 PM
i want org setup

cdhermandher
04-01-2012, 02:01 PM
plz help me

sony8755
04-05-2012, 05:40 AM
hello senior members......
i m use gpgdragon 2years old its best tool of china phone.but i m parchej volcano 31-3-2012. this is only best for mstar cpu. gpgdragon very fast boot MTK.SPREAD chip but volcano is very slow to boot phone and gpg dragon spread 6610-20 find boot D+ D- and rx tx volcano only find 6610-20 D+ D- its donot find rx tx boot.volcano team plz update 6610-20. thank u

shabifxping
04-06-2012, 01:50 AM
My computer need what kind of system can be compatible volcano box. Please help to solve it. Thank you very much

narmath
04-10-2012, 09:15 AM
put battery
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
D+ = 4, D- = 3
Detection D+/D- with 20.19 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
D+ = 4, D- = 3
Detection D+/D- with 20.19 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading finished.
Flash Type: GIGA_GD25Q64
Flash ID: 00C8601700000000
Flash Size: 00800000h
Read phone information seccess.
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
D+ = 4, D- = 3
Detection D+/D- with 20.16 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading finished.
Flash Type: GIGA_GD25Q64
Flash ID: 00C8601700000000
Flash Size: 00800000h
Read Size: 00800000h(8M)
CPU : 8533d/8532_series
Flash Reading...
Flash Reading finished
Phone Lock or SIM Lock:
0000
1000
Anti-theft lock:
460000
460001
0755
4600
screen lock:
210
The data has been saved in E:\china flash file\pe c5 bad fille 10thapril.bin, size: 8 M.
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
D+ = 4, D- = 3
Detection D+/D- with 20.19 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading finished.
Flash Type: GIGA_GD25Q64
Flash ID: 00C8601700000000
Flash Size: 00800000h
CPU : 8533d/8532_series
Flash Erasing finished
Flash Writing finished.
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
D+ = 4, D- = 3
Detection D+/D- with 20.19 seconds!
Analyzing USB device, please wait...
User stop
Pinouts are not fonud!
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
Failed to detect.
Pinouts are not fonud!
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
D+ = 4, D- = 3
Detection D+/D- with 20.19 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading finished.
Flash Type: GIGA_GD25Q64
Flash ID: 00C8601700000000
Flash Size: 00800000h
CPU : 8533d/8532_series
Flash Erasing finished
Flash Writing finished.

slgullu001@gmail.com
04-10-2012, 01:27 PM
its working fast VER 1.1.9 OK

mxkeyasam
04-10-2012, 02:21 PM
f800 Spreadtrum 6600D notdecte on 1.9 verson it is not for Spreadtrum ic pls help or volcanno box not for Spreadtrum 6600D pls help furious team ...516517 it is 16mb file read with other box

mxkeyasam
04-12-2012, 08:40 AM
Lawow f 800 SPREADTRUM CPU SC6600L3 -224G DETECT read flass & format susses help by Md irfan bhai thanks .........520521

dont use ony info try to other job like read or format

narmath
04-13-2012, 10:12 AM
not working for me

prembpt@gmail.com
04-13-2012, 02:35 PM
basson f8oo spreadum cpu how flash help me...........

sonycommm
04-14-2012, 06:28 AM
this service is very 2 slow

naveed_alimd@yahoo.com
04-14-2012, 06:42 AM
how can i get yxtel c6 flashing file

mrizaru@gmail.com
04-14-2012, 04:09 PM
help me I cant setup box volcano....how master? thk

harendra_kum
04-14-2012, 04:59 PM
volcano box support msw8532 plz urgent

frenzie
04-26-2012, 01:53 PM
my box is new and does not detect the phone the ground is null

mxkeyasam
04-27-2012, 07:31 AM
try with any on set

a2zmobile_bhw
04-29-2012, 04:15 AM
i have buy new volcano just setup when try to read info if stop working
574

alfredleo.j
04-29-2012, 07:58 AM
http://www.mediafire.com/?16acmjcjlsfr1fn

asifmughal
04-30-2012, 04:25 AM
br.... volcano box register problam help me................................

al_sky
05-02-2012, 10:33 AM
volcano team pls.help me,SPD chips always appear this error,but for MTK chips is no problem

Set the pinouts failed,please reconnect and try again

screen shot
http://i260.photobucket.com/albums/ii14/al1523/vol.jpg

aprisandi
05-02-2012, 06:15 PM
Tanks...bosss

kaddour
05-05-2012, 08:14 PM
Help me for my volcanobox please?
detection initited,connect the phone and power on it....
failed to detect VCC and GND, no connected to mobile phone or mobile phone is over-current.
>>pinouts are not fonud!

sony8755
05-07-2012, 01:24 PM
volcano do not write imei intex 8809 projecter phone .cpu:mtk 6235 .nand 128 mb size.plz help me any one.....

mr_meralikhil
05-08-2012, 08:33 AM
Volcano Updated: 2012-05-05
Connecting...
Connection successful,connected state!
Version: V3.8
SN:041-188-216
Port:COM64
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: 1
Gnd: 2 5
Detection initiated...
D+ = 6, D- = 8
Detection D+/D- with 1.17 seconds.
Continue to detect BOOT pin...
New USB device: (VID_0E8D&PID_0003)
BOOT(Pull Down) = 3
Detection completed.
Setting pinouts...
Find USB device:USB Modem Driver (COM66), (VID_0E8D&PID_0003)
Pinout setting complete.
Available Ports:COM1 COM2 COM64
Current Port:COM64
Detection initiated...
Vcc: 1
Gnd: 2 5
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 1.03 seconds.
Continue to detect BOOT pin...
New USB device: (VID_0E8D&PID_0003)
BOOT(Pull Down) = 3
Setting...
Find USB device:USB Modem Driver (COM66), (VID_0E8D&PID_0003)
Pinouts setting complete!
Device not found, please re-select the port, or USB reset
>>If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
what shod
i do

stuartelectro
05-08-2012, 10:24 AM
i made a test of my newly bought volcano box for a sample of five set of phones, but it didn't work. kindly please upload sample video even just for spd cpu and cable connections towards phone and volcano box.thank you in advance. more power!

budiman
05-09-2012, 06:39 PM
this method not warking

yeah, this method not working for MTK6253DVN...

trustunlock
05-10-2012, 02:50 AM
not work for me any new idea

trustunlock
05-10-2012, 02:55 AM
me too am asking them to give us simple video so that we can understand....

susantapatel
05-10-2012, 05:31 AM
please help me i open your volcano down load area register then your email already use ,i am not login your down load area i buy volcano box your premium reseller raza electronics,Khidderpore

Dandra radhitya
05-10-2012, 05:39 AM
why i can't download volcano update from this forum...please direct me

asifmughal
05-10-2012, 06:17 AM
my box not registr........................................... ................

kago2012
05-11-2012, 09:14 AM
my volcano box cannot read codes,what's the problem?

bashabaji
05-14-2012, 04:16 PM
i have one problem to conected the mstar (celcon ) mobile detect perfectly ofter choosing any progress like read info and click run button automaticlly disconnect comport

and say to reconnect plz help me sir

sattrajit.singh@gmail.com
05-22-2012, 06:57 PM
My LAVA ARC02 has been not deducted any cpu. showing this error. pls help me. how to deduct any mobile cpu.
Vcc: 4
Gnd: 5
Detection initiated, connect the phone and power on it...
Identifying MT...
Identifying SKY...
Identifying SPD...
Identifying AD...
Identifying Philips...
Identifying Infineon...
Identifying TI...
Identifying SI4904...
>>Could not identify the Chipset.

sattrajit.singh@gmail.com
05-22-2012, 06:58 PM
My LAVA ARC02 has been not deducted any cpu. showing this error. pls help me. how to deduct any mobile cpu.
Vcc: 4
Gnd: 5
Detection initiated, connect the phone and power on it...
Identifying MT...
Identifying SKY...
Identifying SPD...
Identifying AD...
Identifying Philips...
Identifying Infineon...
Identifying TI...
Identifying SI4904...
>>Could not identify the Chipset.

bilal483
05-23-2012, 12:51 PM
Please volcano box team we are very worrry from colsand cpu not write read formate and unlock suported please laounch hurry miracle box today laounching please hurry up hurry up and many customer retrun and hiper and angree with me

sattrajit.singh@gmail.com
05-24-2012, 05:41 AM
My LAVA ARC02 has been not deducted any cpu. showing this error. pls help me. how to deduct any mobile cpu.
Vcc: 4
Gnd: 5
Detection initiated, connect the phone and power on it...
Identifying MT...
Identifying SKY...
Identifying SPD...
Identifying AD...
Identifying Philips...
Identifying Infineon...
Identifying TI...
Identifying SI4904...
>>Could not identify the Chipset.

chitransh
05-24-2012, 01:34 PM
sir, but yxtel c6 not detected

mjmobilesamui
05-25-2012, 04:28 PM
http://www.youtube.com/watch?feature=player_embedded&v=brca47YLmr0

mjmobilesamui
05-25-2012, 04:30 PM
http://www.youtube.com/watch?feature=player_embedded&v=56sFBRPnxqg

indran.ind
05-27-2012, 11:33 AM
i cant do anything in spd ic models help me

stuartelectro
05-28-2012, 01:41 AM
i cant do anything in spd ic models help me

hove you tried installed the the new spd drivers?

if not then try to istall it from the drivers folder of volcano directory...good luck!

mustufa
05-28-2012, 04:37 AM
dear, sir
volcano is not formet coolsand CPU the mobaile is k five.k15

stuartelectro
05-28-2012, 05:38 AM
hello sir! pls help me how to define the format address and length when i would like to format my nokia n87 coolsand cpu.

jewelgold
05-28-2012, 11:35 AM
gud day..
anyone can help me please
after i install and run volcano software
i can run the program
it has an error "volcano box not found,please connect box and run software again"
thanks for your responses..
im new in volcano box..
i have just bought it and was deliver today...

wambula
05-28-2012, 06:30 PM
how to register new box plse help sir

sattrajit.singh@gmail.com
05-29-2012, 04:07 PM
​can i repair usb modem imei?????? Any person help me

narmath
05-31-2012, 09:09 AM
go to task manger ubdate driver manualy

singhm622@gmail.com
06-04-2012, 01:49 PM
sir
i need volcano spd phone driver

jimesh.p.nair@gmail.com
06-04-2012, 03:50 PM
[QUOTE=mujahid;15665]after readflash file is not getting save volcano is getting close automatically mobile brand is [mstar cpu yxtel c6] plz help me sir[

deen.mobile.56@gmail.com
06-05-2012, 06:29 AM
thx sir 6800h not running

elra3y
06-05-2012, 07:40 PM
http://www.gpgdragonsupport.com/ftppro/Banners2012/volcano/2012-03-15-volcano-706.jpg

thanks alot

elra3y
06-05-2012, 07:41 PM
thanks man

deen.mobile.56@gmail.com
06-06-2012, 03:12 PM
no working this method sir

waseem0687
06-07-2012, 10:38 AM
please change boot or reduace baud rate,try again give the right solution

deen.mobile.56@gmail.com
06-08-2012, 08:06 AM
::B thanks for u

celtronix
06-09-2012, 02:55 PM
how to used the rx, tx cable so far it can't detect the phone ever when i tried to used , cause some phones are broken usb suckets,,...pls help,.,.,./

ARWIN
06-10-2012, 02:58 AM
nice shareng sir

mjmobilesamui
06-10-2012, 05:10 PM
how to for use cpu mt6516


718

rezelectro
06-13-2012, 04:56 AM
need flash file nokia e8 mstar


Flash type: NOR
Flash ID: 00C86017
Flash Model: GIGA_GD25Q64
Flash Size: 0x800000(8.0M

mjmobilesamui
06-13-2012, 04:22 PM
need flash file nokia e8 mstar


Flash type: NOR
Flash ID: 00C86017
Flash Model: GIGA_GD25Q64
Flash Size: 0x800000(8.0M

http://www.2shared.com/file/631CX9iC/POFOX_P76_E8_Mstar_GIGA_GD25Q6.html

mxkeyasam
07-11-2012, 10:57 AM
micromax x222 note detected on rx tx but detected on usb mode then i formate but writing problem on imei? so pls help813

jimesh.p.nair@gmail.com
07-17-2012, 04:32 AM
u want c6 file

*#mcjepoy#*
08-22-2012, 12:27 PM
how to find vcc pin in mtk?need help sir!!

hozefa_razzaque@yahoo.com
08-26-2012, 10:52 AM
volcano alwayes Show VCC null Gnd Null Pin out Not Defind

Plzzz HElp

hozefa_razzaque@yahoo.com
08-27-2012, 02:56 PM
My Volcano Not Working plzzz Help

sk_kr_raj
08-28-2012, 12:01 PM
how can i write imei in mtk cpu

hozefa_razzaque@yahoo.com
08-28-2012, 04:32 PM
give me solution plzzz

bugmenot
08-31-2012, 03:02 PM
New USB device: (VID_0E8D&PID_2000)
BOOT(Pull Up) = 1
Setting...
>>Set the Pinouts failed,please reconnect and try again!

dev chaurasiya
09-02-2012, 07:30 AM
i want to know how to flash cool sand cpu

jhasaketan
09-07-2012, 11:54 AM
please change boot or reduce baud rate try it again

jhasaketan
09-07-2012, 11:59 AM
In volcano box spd cpu 6600l connecting the message come please change boot or reduce buad rate try again -------------so what is the solution

deen.mobile.56@gmail.com
09-10-2012, 02:49 PM
sir mstar not work

chinnimobiles
09-15-2012, 03:08 PM
993.plz help me my volcano box spd cpu not working

thilina bandara
10-04-2012, 02:07 PM
Dear sir, I have volcano box. I connect micromax x222 phone. but it shows VCC - Null, Ground - 5 failed to detect. I tried many times please help me sir.
thilina

amit.r.
10-13-2012, 03:51 PM
Version: V3.8
SN:054-164-450
Port:COM11
Available Ports:COM1 COM11
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
Failed to detect.
>>Pinouts are not fonud!
sir please help me

murad6229
10-29-2012, 09:50 AM
I Need Help


1090

Detection initiated...
Vcc: 1
Gnd: 12
Analyzing D+ and D-...
D+ = 4, D- = 5
Detection D+/D- with 1.97 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading failed(2),please re-select other boot file, or USB reset.
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.

javed_922965
10-29-2012, 04:18 PM
good volcano box team ...............................

kvp.anandan
11-11-2012, 02:13 AM
Detection complete usb automati change com4 port
kvp.anandan@yahoo.com

jawad2rajamobile
12-09-2012, 07:31 AM
VOlcano plz add 8851A


Hello volcano team
plz add rda 8851A

sanjiv_thakur
12-09-2012, 01:36 PM
Micromax x222 not starting beyond its logo.........also it is not detecting by volcano.............plz suggest or provide any solution...................

slgullu001@gmail.com
12-13-2012, 12:23 PM
please add 6803 dedection problem

slgullu001@gmail.com
12-13-2012, 12:25 PM
use rx tx test point 100000%okk checked

kommurik99
12-17-2012, 07:39 AM
volcano box ok but
voltage not come with flash cable so please help me any one
cable ok i will try flash with defacement method flash on volcan box but voltage connect with dragon box software done
any one help me how to repair my volcano box

leline-1
12-18-2012, 09:22 AM
deceted gnd null problem is a box hardware problem.first open volcano tool go "system" tab then "system" self chack if every thing ok but still gnd null when booting every phone it is box hardware problem.take it to reseller or try to change the ic1271

ghani
01-12-2013, 02:27 PM
plz help me volcano team ..... sir my box mstar cpu yxtel c6 & c5 boot is ok but read and write button press button then box automaticlly 1308disconnect

kommurik99
01-12-2013, 02:49 PM
hello ghani try to reset pinout i think ur problem will be solved

http://s20.postimage.org/vu1qbut6h/PIC_2013_01_12_12_24_15_PM.jpg (http://postimage.org/image/vu1qbut6h/)
http://postimage.org/image/vu1qbut6h/

riyazu
01-18-2013, 08:44 AM
working for mtk and notworking other cpu

riyazu
01-18-2013, 08:44 AM
working for mtk and notworking other cpus

javed_922965
01-18-2013, 12:47 PM
same problem bro any expert solution

lexstar
01-19-2013, 06:21 AM
1319
im new to volcano and i would like you to help me i detected the phone d+ and d- and it says new usb device : (vid_1eo4&pid_0627) i then set the pinout and try all boots i cant find it i try to reduce baud rate still no use . If i check the after setting switches to platform sometimes it goes to ti platform sometimes mstar&w. Pliz help me understand the (vid_1eo4&pid_0627) maybe i will be able to identify the ic's for me to locate the platform of the ic. Do i need to open the phone to reveale the ic on a phone that is reading easly

lexstar
01-19-2013, 06:22 AM
my email ; mfakose@yahoo.com

sn138
01-24-2013, 11:22 AM
Device not found, please re-select the port, or USB reset
>>If the phone ready to read and write again, please re-plug the USB or reset the pinouts.


pls help mee sir

sanjiv_thakur
01-27-2013, 05:13 PM
Dear Lexstar......After setting the pinout........Select the MSTAR.......in that platform keep the autodetect pinouts check box CHecked.........and start detecting .........after few seconds it will detect the boot............If the whole process failed........then unplug the cables and close the volcano software......and after that restart the whole process...........it will definately detect..........if still not.......then tell me the phone name and model.........

zahirali
02-10-2013, 12:38 PM
bro i have some problm volcano box not fond box driver is ok

Pramod.katariya
04-19-2013, 08:51 AM
Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...

hasan99
04-19-2013, 01:49 PM
Show this massage "Change IMEI successfully" but not really successfully INFO...........1


http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=304900&thumb=1&d=1366346916 (http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=304900&d=1366346916)




INFO...........2

http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=304901&thumb=1&d=1366346962 (http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=304901&d=1366346962)



INFO...........3

http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=304902&thumb=1&d=1366346991 (http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=304902&d=1366346991)


SYMPHONY FT40 Mtk 6236

plz any solution about this problem

Thanks

By

omstartelecom@yahoo.com

harrybally
04-22-2013, 10:56 PM
I cant procced after detecting a phone

mobileansar@yahoo.com
09-04-2013, 08:55 PM
Hello Dear Management Where can I Vlkanvkhrydary cable 7 in 1 for box

nvrsydie
09-15-2013, 02:37 AM
what if it does not detect the phone? does it mean we have to open it and do manual pinout?

nvrsydie
09-15-2013, 02:39 AM
what if it does not detect the phone? does it mean we have to open it and do manual pinout?

forgot to ask... where can i find manual pinout configuration? i have t2i cherry mobile and it has rx tx inside of course, but i dont know where to connect it to the universal jig.

newpanjab
09-16-2013, 12:07 PM
Gnd: null
Detection initiated, connect the phone and power on it...
>>Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...

lingesdcs
09-30-2013, 08:41 AM
>>failed to open port. prm ple help me

devesh tomar
10-02-2013, 09:28 AM
my volcano v:3.8 serialno-250-851-227 is connect ok with software 2.2.8 and other old and new updates but it alwaya fail to detect any mobile, even ok live mobile in any way ,when i check motherbord in system recovery itshows' short circuit detection failed' and when assiboard check it says' faild to connect 'in red colour, please help it is urgent

devesh tomar
10-02-2013, 01:26 PM
bro i have same problem if u got any solution plz tell me

irshad008
10-08-2013, 09:51 PM
volcano box not found

harish goyal
10-11-2013, 02:22 PM
how to flash mt6572 cpu i read bin file but after read i save file but not flash my set s4 i9500 samsung clone after format dead

Abdulla
10-18-2013, 04:05 PM
i am using volcano box before i using xp it was good now i installed win7 64bit driver not supported in this os pls help me 2 time i unstall the exe file still same problam

fazil
10-22-2013, 03:56 PM
Working Fine with MTK not working with SPD and Master please help me, if SPD detect this message comes
" failed to open port.
>>Please change Boot or reduce Baudrate, try it again."

if i change the Baudrate same message comes pls help me

fazil
10-22-2013, 03:59 PM
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: 3
Gnd: 2
Detection initiated...
Found: D+ = 6, D- = 8
Detection D+/D- with 3.95 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Detection completed.
Setting pinouts...
Find USB device:SCI USB2Serial (COM198), (VID_1782&PID_4D00)
Pinout setting complete.
Detection initiated...
Failed to connect, please try again.
Pinouts are not fonud!
Detection initiated...
Failed to connect, please try again.
>>Pinouts are not fonud!

4star
10-29-2013, 08:46 AM
1920


when all solutions not work then od it.

HasanaliMomin
11-27-2013, 06:28 AM
1948

please solution for this volcano

skolekar
12-03-2013, 11:51 AM
1953

Pls give the solution for this problm.

gulsarwar
12-22-2013, 04:25 PM
plz help volcano box not instal in windows 7

salmaan shaik
12-29-2013, 09:14 AM
Communication error with the phone(9),please re-select other boot file.
>>If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
please solve my problem mstar cpu i face this many time sir

salmaan shaik
12-29-2013, 09:15 AM
1953

Pls give the solution for this problm.
Type "regedit" and click OK
Go to HKEY_CURRENT_USER
Then to Software
Then go to volcano_tool
Then right-click on it and select "Expand"
There will be one or more volcano_tool folder, right-click on it and delete it 100% solve ur problem brother enjoy it

aslammits
12-31-2013, 05:10 AM
>Pinouts are not fonud!
ple help

pradee143
01-06-2014, 05:10 PM
Reda with working one

rizwankhan8670
01-07-2014, 09:16 AM
Reda with working one
what do mean? post full info about your problem

raquib_hassan
01-23-2014, 08:33 AM
my volcano box big problam usb not recognized

rizwankhan8670
01-23-2014, 09:08 AM
my volcano box big problam usb not recognized
first remove all old driver instal new driver not solve then do this must check other pc
https://m.ak.fbcdn.net/sphotos-a.ak/hphotos-ak-prn2/s403x403/1384186_602092776511878_1529858704_n.jpg

gaurav pusa
02-05-2014, 02:49 PM
my tol not working plz slution

rizwankhan8670
02-05-2014, 02:53 PM
my tol not working plz slution
which problem you face? post full detail about your problem

gaurav pusa
02-05-2014, 02:57 PM
volcano box not found plz connect box and software again plz sir help me

rizwankhan8670
02-05-2014, 03:04 PM
first remove all old driver instal new driver not solve then do this must check other pc
https://m.ak.fbcdn.net/sphotos-a.ak/hphotos-ak-prn2/s403x403/1384186_602092776511878_1529858704_n.jpg


volcano box not found plz connect box and software again plz sir help me

do this method

manoj kumar singh
02-14-2014, 12:41 PM
volcano tools ido,not understand plz help me

rizwankhan8670
02-14-2014, 01:57 PM
volcano tools ido,not understand plz help me
whats your problem post full detail?

gaurav pusa
02-19-2014, 09:53 AM
volcano box not found plz connect box and software agai20632063n plz sir help me

gaurav pusa
02-19-2014, 09:56 AM
volcano box not found plz connect box and software again plz sir help me


2064


2065

Plz Solv My Problam Sir Ji

rizwankhan8670
02-19-2014, 10:20 AM
volcano box not found plz connect box and software again plz sir help me


2064


2065

Plz Solv My Problam Sir Ji
re instal new driver and check again

gaurav pusa
02-22-2014, 08:51 AM
Upgrading failed Software can"t be run Please retry

PLZ Help me sir ji

gaurav pusa
02-22-2014, 08:53 AM
No Solv sir ji

gaurav pusa
02-22-2014, 08:58 AM
Driver link melega sir ji plzzzzz

rizwankhan8670
02-22-2014, 09:32 AM
Driver link melega sir ji plzzzzz
http://www.mediafire.com/?znke90cgu95fpyx
http://forum.gsmhosting.com/vbb/f723/ur-volcano-dragon-prolific-ic-box-reddy-4-win8-1734031/
http://www.mediafire.com/download/ld137m2clskniz9
first uninstal all box driver via cc cleaner then instal new driver

popotamo
02-22-2014, 04:20 PM
Don't work with any cellular,
volcano it's a bug

rizwankhan8670
02-23-2014, 02:50 PM
Don't work with any cellular,
volcano it's a bug
which problem you face post full detail with screen shot

narayan pathak
07-19-2014, 06:13 AM
2274plz help