Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Jun 2012
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    I9001 is supported to repair boot?

    Hello,

    I have a few questions for the product supporters: is I9001 fully supported?

    I have searched here and many other sites a full list of the phone supported by the GPGJTAG but with no luck. I want to buy this tool but my first phone to repair will be an I9001 with I9000 software on it. Becouse the USB comunication is lost on that phone and I dont have any other way to repair it, I need to do a JTAG on it.

    Do you think it is posible? Becouse I didnt see any tutorial for this phone from GPG.

    Thank you!

  2. #2
    Product Promoter
    Sniper_04's Avatar

    Join Date
    Dec 2011
    Location
    Calapan City/Rosario Batangas,Philippines
    Posts
    56
    Thanks
    2
    Thanked 20 Times in 11 Posts
    CaptureWiz059.jpg

    yes it supported and you can repair it


    br,
    Sniper_04
    Attached Images Attached Images

  3. #3
    Junior Member
    Join Date
    Jul 2012
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Port: COM95
    Please press Power On key before any Read/Write/Erase operation.
    PIN1 = TRST
    PIN2 = TMS
    PIN4 = TDI
    PIN5 = GND
    PIN6 = SYSRST
    PIN7 = TCK
    PIN8 = TDO
    Setting definition...
    Set definition done!
    Error 4 no flash file was selected.
    Writing in progress(make sure to press Power On key)...
    CPU ID: FFFFFFFF.
    Error 15 don't support this CPU, or connection error please check connection
    Time: 1 s




    ==========================================
    Read operation(Make sure to press Power on key)...
    CPU ID: FFFFFFFF.
    Error 15 don't support this CPU, or connection error please check connection
    Time: 1 s
    i'm new user for GPGJTAG ..... what should i do?

  4. #4
    Junior Member
    Join Date
    Jun 2012
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by minaz View Post
    Port: COM95
    Please press Power On key before any Read/Write/Erase operation.
    PIN1 = TRST
    PIN2 = TMS
    PIN4 = TDI
    PIN5 = GND
    PIN6 = SYSRST
    PIN7 = TCK
    PIN8 = TDO
    Setting definition...
    Set definition done!
    Error 4 no flash file was selected.
    Writing in progress(make sure to press Power On key)...
    CPU ID: FFFFFFFF.
    Error 15 don't support this CPU, or connection error please check connection
    Time: 1 s




    ==========================================
    Read operation(Make sure to press Power on key)...
    CPU ID: FFFFFFFF.
    Error 15 don't support this CPU, or connection error please check connection
    Time: 1 s
    i'm new user for GPGJTAG ..... what should i do?
    You need to solder the wires better. You don't have a good conection with the phone.
    When you press Read or Write button you need to try to have the battery full in the phone and the usb cable connected from the PC to the phone.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •