Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Nov 2011
    Posts
    14
    Thanks
    0
    Thanked 1 Time in 1 Post

    Question what is problem Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00) ??????????????

    User stop
    Pinouts are not fonud!
    Detecting rx and tx...
    Vcc: 12
    Gnd: 6 10
    Detection initiated, connect the phone and power on it...
    Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
    User stop
    For many phones, charge pins need to be set in order to identify USB devices.
    Detecting D+ and D-...
    Vcc: 12
    Gnd: 6 10
    Detection initiated...
    Found: D+ = 3, D- = 1
    Detection D+/D- with 3.36 seconds!
    Analyzing USB device, please wait...
    Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
    Detection completed.
    Detection initiated...
    Vcc: 12
    Gnd: 6 10
    Analyzing D+ and D-...
    D+ = 3, D- = 1
    Analyzing USB device, please wait...
    Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00)


    Internal version: SPRD3
    Boot downloaded.
    Start boot please wait a moment....
    >>Please change Boot or reduce Baudrate, try it again.

  2. The Following User Says Thank You to alkesh For This Useful Post:

    pradeephd 2 (11-02-2012)

  3. #2
    Senior Member
    Join Date
    Oct 2011
    Location
    Kick Mode Activated!!! Be Care.
    Posts
    806
    Thanks
    67
    Thanked 694 Times in 185 Posts
    we have some problem in READINFO on some SPD phones

    but you can do format,readflash,write flash etc to almost all SPD phones

    Change boot and try your job.


    post here scrreen shot so i can check error.


    WHATS YOUR FONE STATUS??

  4. #3
    Product Promoter
    Qaisar Mahmood's Avatar

    Join Date
    Jan 2012
    Location
    A, A
    Posts
    443
    Thanks
    0
    Thanked 156 Times in 71 Posts
    go to SPD tab

    connect phone

    select Boot 6600Lx Series (USB /COM) or Other boot

    select USB (D+/ D-)

    select operation you want ( read flash. write flash. Format)

    and click run

    try and post result.

    Br,


    Volcano Box Ahead Off All.

  5. #4
    Junior Member
    Join Date
    Nov 2011
    Posts
    14
    Thanks
    0
    Thanked 1 Time in 1 Post
    ok i tray and post

  6. #5
    Junior Member
    Join Date
    Jan 2012
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    what can i do micromax a62 not connecting to my volacano some budy help me

    Connection successful,connected state!
    Version: V3.8
    SN:099-099-619
    Port:COM3
    After format or Flash you have to press & hold power button for at least 1.30 mins.
    Note for win7 users :
    Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
    After that the spd drivers will have the ability to be loaded.
    Available Ports:COM1 COM3
    Detection initiated...
    Vcc: null
    Gnd: null
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Analyzing USB device, please wait...
    Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
    Setting...
    Set the Pinouts failed,please reconnect and try again!
    Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Analyzing USB device, please wait...
    Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
    Setting...
    Set the Pinouts failed,please reconnect and try again!

    Waiting for phone's response, press the Power on the phone
    Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Analyzing USB device, please wait...
    Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
    Setting...
    Set the Pinouts failed,please reconnect and try again!
    Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Analyzing USB device, please wait...
    Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
    Setting...
    Set the Pinouts failed,please reconnect and try again!
    Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Analyzing USB device, please wait...
    Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
    Setting...
    Set the Pinouts failed,please reconnect and try again!
    Reset USB device and search it...
    Time-out, try again, or re-plug your phone, or re-defined pinouts.
    Reset USB device and search it...
    Time-out, try again, or re-plug your phone, or re-defined pinouts.
    Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Analyzing USB device, please wait...
    Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
    Setting...
    Set the Pinouts failed,please reconnect and try again!
    Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Analyzing USB device, please wait...
    Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
    Setting...
    >>Set the Pinouts failed,please reconnect and try again!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •