Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Mar 2012
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts

    8533x series could not flash

    hear is the log kindly help me
    Volcano Updated: 2013-09-13
    Connecting...
    Connection successful,connected state!
    Version: V3.8
    SN:328-605-302
    Port:COM10
    After format or Flash you have to press & hold power button for at least 1.30 mins.
    Note for win7 users :
    Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
    After that the spd drivers will have the ability to be loaded.
    Available Ports:COM10
    Current Port:COM10
    Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Detection D+/D- with 1.16 seconds.
    Continue to detect BOOT pin...
    Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
    BOOT(Pull Up) = 1
    Setting...
    Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
    Pinouts setting complete!
    Connecting to phone...
    Connection success!
    Boot downloading...
    CPU ID:00408003
    Boot downloading finished.
    Flash Type: NUMONYX_M58LR128KC
    Flash ID: 0020882E00000000
    Flash Size: 01000000h
    CPU : 8533x_family_series
    Flash Erasing finished
    Flash Writing...
    Flash Writing ovettime(2),please re-select other boot file
    If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
    Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Detection D+/D- with 1.13 seconds.
    Continue to detect BOOT pin...
    Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
    BOOT(Pull Up) = 1
    Setting...
    Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
    Pinouts setting complete!
    Connecting to phone...
    Connection success!
    Boot downloading...
    Boot downloading failed(2),please select another boot file, or replug USB.
    If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
    Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2

  2. #2
    Junior Member
    Join Date
    Mar 2012
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    any body help me when i flash the mobile then this log always show kindley help me

  3. #3
    Junior Member
    Join Date
    Feb 2013
    Posts
    19
    Thanks
    2
    Thanked 1 Time in 1 Post
    try to change boot file

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •