Volcano Box Basic User Manual PDF

[Atif Ikram]

How To Write MTK IMEI (625A) To AT Mode :

• Turn On The Phone
• Connect To PC Using USB Cable
• Now Select PC Suite / COM
• Install Driver
• Open Volcano Latest Soft
• Go To MTK Tab
• Enable Imei Option
• Select ''Write IMEI''
• Unmark Auto Detect Pinout
• Mark USB Mode
• Now Click To Run
• Select Phone Port ( COM PORT )
• Select AT If Already Not Selected
• Entry IMEI
• Click To ""Write IMEI(W)""
• Wait Until Done

Enjoy Volcano

[Atif Ikram]

How To Connect MTK Using Detect Tab :

• Open Volcano Latest Software
• Go To Detect Tab
• Select To Detect Type "" [D+/D-]MTK USB & Mstar (Do Find Boot)
• Connect Phone To Volcano Main Cable
• Click To Detect
• Press Power Key If Not Detect Then Boot Key {Note-Some Pone Auto Detect, No Need Press Any Key & Some Phone In PCB Have Boot Point (Like TX RX ) That Phone For Booting You Need Connect Boot Point To GND}
• After Pinout Detected Click To Set Pinout
• Now Go To MTK Tab
• Unmark Auto Detect Pinout
• Select USB Mode
• Now Select Correct MTK Boot
• Select Read Write Format What You Want
• Run

Enjoy

[Atif Ikram]

VOLCANO BOX USB DEVICE NOT RECOGNIZED 100% TESTED ME

[Atif Ikram]

How to Read & Write NV for MTK Andriod ?

How To Backup NV :

1. Your phone must be ROOTED & Debug Mode on & Powered on phone
2. Connect Phone with usb
3. Download & Run VolcanoBox Latest Version
4. Go to MTK Tab -> One-Click Root -> Backup NVRam
5. Run

How To Write NV :

1. Your phone must be ROOTED & Debug Mode on & Powered on phone
2. Connect Phone with usb
3. Download & Run VolcanoBox Latest Version
4. Go to MTK Tab -> One-Click Root -> Write NVram
5. Run

[Atif Ikram]

Lets Know About Android Tools

Where To Download ADB & Fastboot Driver
http://forum.gsmhosting.com/vbb/f723...7/#post9865063



in Android Tool
USB MODE ( Boot mode )
Read info
Read Flash
Write Flash
Read NVRAM
Write NVRAM
Root with Boot ( this is not ADB ROOT )
Recovery
Format ( Auto & Manual Both )
Rebuild Imei ( Changing of imei is illegal )
4 Imeis can rebuild
MTK & SPD Phones Supported


ADB MODE( Powered on and usb debug enabled )
Is ADB ( to check is phone is attached correctly or not )
ADB Root ( to root phone in usb debug mode enabled )
Wipe_ALL ( to wipe phone's data in usb debug mode enabled and phone must be rooted )
BACKUP FLASH ( to take backup of flash file phone should be rooted and usb debug mode enabled )
Backup NvRam ( to take backup of NV )
IS ROOT ( to check is phone rooted or not )
ADB UNROOT ( to unroot phone via adb method phone should be powered on and usb debug enabled )
Reset Gmail ( to reset Gmail account which Android phone asking after too many pattern attempts )
Unlock ( to unlock phone... Not SP UNLOCK )
Write NVram ( to write back Nv )

TABLET
IS ADB ( to check is Tablet connected well to your pc & usb debug enabled )
ROOT ( to root tablets make sure tablet is powered on & usb debug enabled )
Read NV ( to read tablets nv )
IS ROOT ( to check is tablet rooted or not )
UNLOCK ( to unlock )
WRITE NV ( to write NV back to Tablet )

FASTBOOT
IS FASTBOOT ( To check is phone is connected correctly in fastboot mode )
WIPE USERDATA ( to clear all data and make factory reset can solve pattern lock & gmail account etc )
EXIT FASTBOOT ( to exit fastboot mode phone will restart into normal mode )
WIPE CACHE ( to wipe/delete all cache )
BACKUP FILE ( to create backup files phone should be in fastboot mode )
WRITE FILE ( to write Boot, Recovery, System, Data, Cache & Update.zip )
HTC Phone ( to get MIDINFO, CIDINFO, Write OEMCID, Write SuperCID & IdentifyINFO )

MODEM
IS MODEM ( is modem connected successfully )
PHONE INFO ( information about connected device )

TOOL
Root Tool ( to slip, Merge & CVT File )
File Version ( to know what kind of ver is in your Flash file )

[Atif Ikram]

how to enable USB debugging?

As for enabling USB debugging in Android 2.3 or newer can be done by..

1. Open the Settings.
2. Now tap on “Applications”.
3. And then go to “Development”.
4. Check the option: “USB debugging”

As for enabling USB debugging in Android 4.0 or newer can be done by...

1. Open the Settings.
2. Search then Tap on “Developer options”.
3. Check the option: “USB debugging”.

As for enabling USB debugging in Android 4.2 or newer can be done by...

1. Open Settings > About.
2. Go to “Build Number” at the end of the Scroll list.
3. Tap that “Build Number” repeatedly for 7 times. But on the third tap, you will be presented with a message saying you only 4 more taps to be a developer. Therefore continue tapping till "Hooray, you are now a ‘Developer’ appears, at this phase the go back to Setting page.
4. Now Developer Option will be included in setting list of yours now.
5. Launch Developer Options, then check USB debugging > Ok. Done!

Once it's enabled you, even as non-developer you will get a level of access over your device to give you bigger freedom in controlling your device.

[Atif Ikram]

How To Know My Android Device Already Enable USB Debugging...?

• Turn On The Device
• Connect To PC Using USB CABLE
• Now If Go To Device Manager
• Install Driver
• Now If You See " ADB Interface " That Means Device Degag Enable

Look Driver Successfully Install Done

You See On The Screenshot ADB Interface

[Atif Ikram]

How To Check Device Info To ADB MODE:

• Open Volcano Software
• Go To Android Tab
• Click To ADB MODE Tab
• Now Select IS ADB
• Click To Start
• Now You Will See Device Info ( Model : Android Version : Baseband : IMEI )

Device Info Read Done

[Atif Ikram]

How To Check Device Rooted Or Unrooted To ADB Mode:

• Open Volcano Software
• Go To Android Tablet
• Click To ADB MODE Tab
• Select IS ROOT
• Click To Start
• Now You Will See Device Root Info ( Already Rooted Or Unrooted )

Device Rooted Or Unrooted Check Done

[Atif Ikram]

How To Root Any Android To ADB Mode :

• Open Volcano Software
• Go To Android Tablet
• Click To ADB MODE Tab
• Select ADB ROOT
• CLICK TO START
• NOW Wait For Have Been Rooted

Root Done