Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts

    24 hours Ambulance services for mobiles in DRAGON MOBILE HOSPITAL

    How to work with MSTAR CPU (8533 e.t.c.)




    With New Version






    [YOUTUBE]O-mlbAXPimw[/YOUTUBE]










    With Old Version[/B]




    [YOUTUBE]Bdn1356RLCc[/YOUTUBE]







    Thanks to Dulu Bhai
    http://forum.gsmhosting.com/vbb/member.php?u=1736341






    BR




    DIPENDRA PATHAK






















    .

  2. #2
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts
    How to set Manually pinout for Coolsand (an Example) with GPG Dragon


    How to Set Manually Pinout for Coolsand (Just an Example)






    [YOUTUBE]naZbXoYHync[/YOUTUBE]
































    BR


    Dipendra Pathak






















    .

  3. #3
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts

    Receive Data 0x7E Error... - Android CPU Solution

    Receive Data 0x7E Error... - Android CPU Solution






    We want to provide the solution through some hints/tips because this is not software problem but this is driver problem.
    we are starting this thread, so that the we also could be confirm by our valuable customer. So, try to connect our supporter
    if you are stuck in any point




    Check this post


    http://forum.gsmhosting.com/vbb/f646...-help-1687278/




    Also if you find the problem like this:







    In such a case, open the "DEVICE MANAGER"









    we can see the driver name as "SPRD U2S Diag"


    "SPRD U2S Diag" driver not for SPD chip Device. So, when you try each and every time, it shows error.


    we need uninstall it and instll to sci (spd flash driver).


    open the c:\windows\system32







    And search all "sprd" name file





    Delete all


    after del,you need use dragon software pinfind again


    after pinfind,in the driver manager will tell you install the new driver























    install the driver <7-Select SCI Driver>


    after install the driver, we can read flash file. Now, dragon successfully reads.















    Good Luck Dragon Users






    BR


    Dipendra Pathak

  4. #4
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts
    how to Made the MTK driver support your MTK Phone

    en..at this time,I face some problem for the MTK stuep the driver


    I sure the Mobile is MTK CPU,and in the driver install I has select the MTK Driver


    but still error,and can't install it


    how to solve??? read this!!!!




    sample with windows XP(x86) system


    first,we open the mtk driver inf file"usb2ser_2kXP.inf"


    The device manager show you the driver name!





    now we can add the new driver info support the mtk phone hardware


    add the driver pid and vid to the info file





    after save the inf file,and install the driver again,finish

  5. #5
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts
    how to Made the MTK driver support your MTK Phone

    en..at this time,I face some problem for the MTK stuep the driver


    I sure the Mobile is MTK CPU,and in the driver install I has select the MTK Driver


    but still error,and can't install it


    how to solve??? read this!!!!




    sample with windows XP(x86) system


    first,we open the mtk driver inf file"usb2ser_2kXP.inf"


    The device manager show you the driver name!





    now we can add the new driver info support the mtk phone hardware


    add the driver pid and vid to the info file





    after save the inf file,and install the driver again,finish

  6. #6
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts

    also for the mtk imei driver you can edit it and support your phone

    also for the mtk imei driver you can edit it and support your phone



  7. #7
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts
    How to change SPD 6820 / 8810 Andorid 4 IMEI Without Root and few Click (Mobile PHone N9300)






    Read Info











    Format User Data














    How to change SPD 6820/8810 Andorid 4 IMEI Without Root and few Clicks





    1. Open SPD Tab.
    2. Connect the mobile with Dragon Main Cable and + and - power cable with it (No Battery)
    3. Tick "Scan Pinout"
    4.Choose "Write IMEI"
    5. Choose "6820 Android" Boot
    6. Choose "USB"
    7.Start
    8. Wait Yellow line when it becomes 100% and IMEI Box becomes Green and opens for IMEI write

















    9. Fill the Correct IMEI that is printed on the Mobile Housing








    10. Click On "Write IMEI" and Wait
    11. Wait for message "Write (IMEI) to Mobile Done"










    12. Restart Your mobile and check the IMEI using keys *#06#


    13. Done










    We do not believe in Faith, Miracle etc, We believe in Work and we believe in GPG Dragon









    BR
    Dipendra Pathak

  8. #8
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts
    How to change SPD 6820 / 8810 Andorid 4 IMEI Without Root and few Click (Mobile PHone N9300)






    Read Info











    Format User Data














    How to change SPD 6820/8810 Andorid 4 IMEI Without Root and few Clicks





    1. Open SPD Tab.
    2. Connect the mobile with Dragon Main Cable and + and - power cable with it (No Battery)
    3. Tick "Scan Pinout"
    4.Choose "Write IMEI"
    5. Choose "6820 Android" Boot
    6. Choose "USB"
    7.Start
    8. Wait Yellow line when it becomes 100% and IMEI Box becomes Green and opens for IMEI write

















    9. Fill the Correct IMEI that is printed on the Mobile Housing








    10. Click On "Write IMEI" and Wait
    11. Wait for message "Write (IMEI) to Mobile Done"










    12. Restart Your mobile and check the IMEI using keys *#06#


    13. Done










    We do not believe in Faith, Miracle etc, We believe in Work and we believe in GPG Dragon









    BR
    Dipendra Pathak

  9. #9
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts
    HOW TO Remove Pattern Lock of MTK Android Mobiles ie MTK 6575 etc.










    BATTERY + USB Cable Way





    1. Switch the mobile Off
    2. Take out the battery and re-install the battery to the device.
    3. Now, Open Dragon Software
    4. Choose Dragon Box Port
    5. CheckBox (Box Connects in Specif port)
    6. Go to "MTK" Tab
    7. Un-tick "Scan Pinout" If you are doing with USB cable + Battery
    8. Choose "Format"
    9. Tick "Auto Format" if you don't know the Manual Format Address
    10. Choose "USB" (not COM)
    11. Click "Start"
    12. Now, Press the Boot Key and Connect the mobile to the computer with the help of USB Data Cable.


    Note: Boot Key might be Volume Down or Home Button etc.


    13. Wait and let the mobile install necessary drivers.
    14. Waits until you see "All Done"
    15. Done













    MAIN CABLE and +/- of Main Cable Way







    1. Device must be ticked "Development" Option.
    2. Connect Mobile with GPG Dragon Main Cable and +/- Cable from Main Cable (for power supply)
    3. Now, Open Dragon Software
    4. Choose Dragon Box Port
    5. CheckBox (Box Connects in Specif port)
    6. Go to "MTK" Tab
    7. Tick "Scan Pinout" If you are doing with Main Cable + Dragon Cable Power Supply (NO Battery)
    8. Choose "Format"
    9. Tick "Auto Format" if you don't know the Manual Format Address
    10. Choose "USB" (not COM)
    11. Now, Press the Boot Key and Click on "Start"


    Note: Boot Key might be Volume Down or Home Button etc.


    12. Wait and let the mobile install necessary drivers.
    13. Waits until you see "All Done"
    14. Done

  10. #10
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts

    How to Repair MTK IMEI With USB Method

    How to Repair MTK IMEI With USB Method




    WIth the help of Dragon Main Cable + Main cable Power supply (Do not use Battery )


    1. Open the Dragon Software
    2. Choose "MTK" tab
    3. Tick "Scan Pinout"
    4. Choose "USB" (NOT COM Port)
    5. Now, Connect the Device With Dragon MAIN CABLE and its power cable (NOT Battery and USB cable)
    6. Click on "Start"
    7. Wait until the Yellow mark goes to 100% and turn Green
    8. Write Valid IMEI
    9. Click on "Write IMEI"
    10. Wait until IMEI Written.
    Done




    WIth the help of USB Cable and Battery (Do not use Dragon Main Cable and Power supply)



    1. Open the Dragon Software
    2. Choose "MTK" tab
    3. Untick "Scan Pinout"
    4. Choose "USB" (NOT COM Port)
    5. Click on "Start"
    6. Insert Battery + USB Cable and now connect to the computer
    7. Wait until the driver installed
    8. Now you will see Yellow mark goes upto 100% and it turns Green
    9. Write Valid IMEI
    10. Click on "Write IMEI"
    11. Wait until IMEI Written.
    Done



    NOTE: Sometimes you must ON Device, and choose Device Diagnostics Port to repair IMEI.




    STILL IMEI NOT CHANGING WHAT IS THE PROBLEM?


    Sometimes You changed the IMEI of 6252 (MTK) using Dragon Box, Still IMEI not changing, in such a case, follow the methods:


    1. Backup the flash file of the mobile
    2. Save it to the hard disk or portable device
    3. Write it back to the Device (Mobile)
    4. Check the IMEI
    5. Done


    Please USE only USB Method. COM method not supported yet.









Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •