Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts
    How to Repair MTK IMEI With USB Method


    How to Repair MTK IMEI With USB Method




    WIth the help of Dragon Main Cable + Main cable Power supply (Do not use Battery )


    1. Open the Dragon Software
    2. Choose "MTK" tab
    3. Tick "Scan Pinout"
    4. Choose "USB" (NOT COM Port)
    5. Now, Connect the Device With Dragon MAIN CABLE and its power cable (NOT Battery and USB cable)
    6. Click on "Start"
    7. Wait until the Yellow mark goes to 100% and turn Green
    8. Write Valid IMEI
    9. Click on "Write IMEI"
    10. Wait until IMEI Written.
    Done




    WIth the help of USB Cable and Battery (Do not use Dragon Main Cable and Power supply)



    1. Open the Dragon Software
    2. Choose "MTK" tab
    3. Untick "Scan Pinout"
    4. Choose "USB" (NOT COM Port)
    5. Click on "Start"
    6. Insert Battery + USB Cable and now connect to the computer
    7. Wait until the driver installed
    8. Now you will see Yellow mark goes upto 100% and it turns Green
    9. Write Valid IMEI
    10. Click on "Write IMEI"
    11. Wait until IMEI Written.
    Done



    NOTE: Sometimes you must ON Device, and choose Device Diagnostics Port to repair IMEI.




    STILL IMEI NOT CHANGING WHAT IS THE PROBLEM?


    Sometimes You changed the IMEI of 6252 (MTK) using Dragon Box, Still IMEI not changing, in such a case, follow the methods:


    1. Backup the flash file of the mobile
    2. Save it to the hard disk or portable device
    3. Write it back to the Device (Mobile)
    4. Check the IMEI
    5. Done


    Please USE only USB Method. COM method not supported yet.









  2. #12
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts
    Dragon Triple three {333} BOX drivers . MTK USB SPD USB ANDRIOD SPD USB COOLSAND


    Dragon Triple three {333} BOX drivers .
    MTK USB
    SPD USB
    ANDRIOD SPD USB
    COOLSAND USB


    Download

  3. #13
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts

    MTK Android Return Data Eroor !!! solution Here..


  4. #14
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts
    How to Remove Pattern Lock of Android MTK device without USB Dubbing and losing data


    How to Remove Pattern Lock of Android MTK device (NOT ANDROID SPD) without USB Debugging and without Loosing User Data with Battery and Normal Cable




    If your device not connected in ADB Mode, that mean your device "USB DEBUTTING" is OFF. So, you can not connect your device in ADB Mode. For this you have some idea or trick.




    1. Connect your Switch OFF Android Device (Mobile) with Normal USB Cable and Battery (Do Not USE Modified Cable)









    Now, If you see in the "Device manager" You can see like above picture because the DEVICE "USB DEBUGGINE" is OFF.


    2. Now, Open Dragon Software in MTK Tab
    3. Now, choose "Write IMEI"
    4. Tick "Android IMEI"
    5. Choose "USB" (Not Com port)
    6. Now, Click on "Start"
    7. Wait.....Now, you can see the IMEI of the Device on the Dragon Main Screen / Output Screen.









    8. This means, Device is connected in ATE Mode now. And now, device also connects in ADB interface.
    (To confirm this, Check the "Device Manager" of you computer. You can see "Device Name ie Samsung Android Phone" in first row and "Android Composite ADB Interface" in the second row.)













    9. Now, go to Dragon "Android" Tab (Do not disconnect device from the computer. Let it be connected.)
    10. Choose "Clear Pattern Lock by ADB"
    11. Click "Start"









    12. Wait until you see "All Done" in the Dragon Software Main Screen.
    13. Now, Device will Restart.
    14. Now, you can draw any kind of Pattern you like. Your device will open.
    15. Enjoy!!!






    Note: This method only works "Android MTK Devices", Not for "Android SPD Devices". And this method only not for Chinese Devices but Also Original Devices that is available in the Market. )

  5. #15
    Banned
    Join Date
    Feb 2012
    Location
    Kathmandu, Nepal
    Posts
    225
    Thanks
    2
    Thanked 226 Times in 49 Posts
    How To use 4 REGULAR jIG For MTK SPD RDA COOLSAND


    For Daily Info About These jigs
    This Is tooo old but Mostly Users Not know this
    So Team Decide To Make Easy For Dragon Users

    daily many users again and again
    use wrong way of these jig
    and post again and again
    you can set these as manul pinout for coolsand rda
    then your file readed ok and working 100%
    P-05B

    Every One Know This jig
    But Not know how to use right way
    of this ji

    This jig is for MTK SPD MSTAR COOLSAND
    AND Many Others Brands
    also pinout same
    this jig have 5 pin
    USB
    1:- VCC CH
    2:- D- DM
    3:- D+ DP
    4:- EMPTY
    5:- GND
    RX TX
    1:- VCC
    2:- RX
    3:- TX
    4:- Empty
    5:- GND


    P-10C





    this jig is
    For MTK SPD MSTAR COOLSAND RDA
    ZTE HUAWIE AND MANY OTHERS BRANDS
    BUT WE POST ABOUT COOLSAND PINOUT
    D-=8
    D+=6
    RX 7
    TX 9
    RXD 3
    TXD 4




    P-12C





    IN THIS JIG
    FOR RDA COOLSAND
    RX 6
    TX 7

    For SPD
    D+:9
    D-:8



    Universal JIG







    NOT only for RX or TX
    u can use Uni jig for
    USB
    as
    D+ D-
    DP DM









    BR
    Gsm.Universal


Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •