Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Product Promoter
    Join Date
    Dec 2011
    Posts
    121
    Thanks
    9
    Thanked 36 Times in 16 Posts

    24 hours Ambulance services for mobiles in DRAGON MOBILE HOSPITAL

    24 hours Ambulance services for mobiles in DRAGON MOBILE HOSPITAL


    With New Version



    http://www.youtube.com/watch?v=O-mlbAXPimw





    With Old Version[/B]


    http://www.youtube.com/watch?v=Bdn1356RLCc




    Thanks to Dulu Bhai http://forum.gsmhosting.com/vbb/member.php?u=1736341



    BR

  2. #2
    Product Promoter
    Join Date
    Dec 2011
    Posts
    121
    Thanks
    9
    Thanked 36 Times in 16 Posts
    How to set Manually pinout for Coolsand (an Example) with GPG Dragon



    How to Set Manually Pinout for Coolsand (Just an Example)







    http://www.youtube.com/watch?v=naZbXoYHync

















    BR

  3. #3
    Product Promoter
    Join Date
    Dec 2011
    Posts
    121
    Thanks
    9
    Thanked 36 Times in 16 Posts
    How to change 625a CPU IMEI with USB Cable with Dragon box?

    1.Select "MTK"
    2.Select "Write IMEI"
    3.Mobile option "COM" switch to "USB"
    4.Click "Start"
    5. Now, Insert Battery to the mobile and Connect USB Cable to the Computer
    6. Now, software shows you Original IMEI
    7. Write any valid IMEI to the software's IMEI Box
    8.Click "write imei"
    9. Done

  4. #4
    Product Promoter
    Join Date
    Dec 2011
    Posts
    121
    Thanks
    9
    Thanked 36 Times in 16 Posts
    How to remove Password from Mstar CPU (Phone) ?


    This function makes the flash file passwordless. This means when you use this option, then, Dragon removes the password and saves new passwordless file to the computer. Now, you have to write this file to the mobile again.

    1. Open the Dragon software
    2. Click on "CheckBox"
    3. Now, go to "Mstar" Tab
    4. Choose option as "Read Password"
    5. After this, you will see a box called "Clear_code". Tick the "Clear_Code"
    6. Now, Choose the file name you want to save.
    7. Click "Start"
    8. Wait until the flash file is fully read by Dragon Box
    9. Now, you need Write this Flash File File to the Device
    10. Wait until the flash file written.
    11. Done. Now, your device is passwordless

  5. #5
    Product Promoter
    Join Date
    Dec 2011
    Posts
    121
    Thanks
    9
    Thanked 36 Times in 16 Posts
    How to Spice M5460 MT6250/20 Touch Pad Calibration With the help of Dragon Box


    1. Open Dragon Old Version Software 2.13
    2. Connect Box
    3. Choose "Tracker" Choose "Boot Version" and Click "Start"




    4. Press and Hold Power button until software tells you to release.

    5. Now, Choose "Restore Settings"





    6. Click on "Restore"




    7. Now, Choose Calibration Data "6253.cci" and Click on "Open"
    8. Software shows you error but don't worry, it works.




    9. Again Click on "Restore"
    10. Choose Calibration Data "calibration titan.cci" and Click on "Open"
    11. software shows you an error but doesn't matter, it works.
    12. Again Click on "Restore"
    13. Once more time, Choose Calibration Data "MTK6225.cci"
    14. software shows you an error but doesn't matter, it works.
    15. Again Click on "Restore"
    16. Finally, Choose Calibration Data "MTK 6223.cci" and Click on "Open"
    17. software shows you an error but doesn't matter, it works.
    18. Done.



    Video Tuterial + Touch CCI file Download Link:

    http://www.4shared.com/rar/x97Bc_w3/...th_Dragon.html

    NOTE:
    No need to do all the data at the same time because touch data can hang the mobile and not function the touch even you calibrate it. I did it because Customer wants to see the functional Screen or needs new mobile from my site. Because it was happened when I reset the mobile and could not calibrate from any other devices.

  6. #6
    Product Promoter
    Join Date
    Dec 2011
    Posts
    121
    Thanks
    9
    Thanked 36 Times in 16 Posts
    HOW TO WRITE IMEI of MTK ANDROID MOBILE 6575 etc.



    1. Power ON the device (Mobile)
    2. Tick "Development" Option.
    3. Now, Switch the mobile Off
    4. Take out the battery and re-install the battery to the device.
    6. Now, Open Dragon Software
    7. Choose Dragon Box Port
    8. CheckBox (Box Connects in Specif port)
    9. Un-tick "Scan Pinout" If you are doing with USB cable + Battery
    10. Choose "Write IMEI" in MTK tab
    11. Choose "USB" (not COM)
    12. Tick "Android IMEI"
    13. Click "Start"
    14. Wait and let the mobile install necessary drivers.
    15. Now, you can see, yellow lines running in the button. Wait until it finish 100%
    16. Now, IMEI Box Opens in Blue colour.
    17. Write the IMEI that is written in the mobile housing.
    18. Click "Write"
    19. Now, Connect the USB cable to the Computer
    20. Waits until you see "Successfully Done"
    21. Done

  7. #7
    Product Promoter
    Join Date
    Dec 2011
    Posts
    121
    Thanks
    9
    Thanked 36 Times in 16 Posts
    HOW TO Remove Pattern Lock of SPD Android Mobiles ie SPD 6820/8810.




    BATTERY + USB Cable Way


    1. Switch the mobile Off
    2. Take out the battery and re-install the battery to the device.
    3. Now, Open Dragon Software
    4. Choose Dragon Box Port
    5. CheckBox (Box Connects in Specif port)
    6. Go to "SPD" Tab
    7. Un-tick "Scan Pinout" If you are doing with USB cable + Battery
    8. Choose "Format"
    9. Choose Mobile Option "6820_Android"
    10. Choose Use Option as "Format"
    11. Tick "Format_UserData" (DO NOT Select Format_RuntimeNV, Format_Cache, Format_Misc)
    12. Choose "USB" (not COM)
    13. Click "Start"
    14. Now, Press the Boot Key and Connect the mobile to the computer with the help of USB Data Cable.

    Note: Boot Key might be Volume Down or Home Butten etc.

    15. Wait and let the mobile install necessary drivers.
    16. Waits until you see "All Done"
    17. Done








    MAIN CABLE and +/- of Main Cable Way (No Battery)



    1. Switch the mobile Off
    2. Connect the Mobile with the help of Dragon MAIN CABLE + DRAGON +/- wire (Not from Battery)
    3. Now, Open Dragon Software
    4. Choose Dragon Box Port
    5. CheckBox (Box Connects in Specif port)
    6. Go to "SPD" Tab
    7. Tick "Scan Pinout" If you are doing with USB cable + Battery
    8. Choose "Format"
    9. Choose Mobile Option "6820_Android"
    10. Choose Use Option as "Format"
    11. Tick "Format_UserData" (DO NOT Select Format_RuntimeNV, Format_Cache, Format_Misc)
    12. Choose "USB" (not COM)
    13. Now, Press the Boot Key and Click on "Start".

    Note: Boot Key might be Volume Down or Home Butten etc.

    14. Waits until you see "All Done"
    15. Done

  8. #8
    Product Promoter
    Join Date
    Dec 2011
    Posts
    121
    Thanks
    9
    Thanked 36 Times in 16 Posts
    HOW TO Remove Pattern Lock of MTK Android Mobiles ie MTK 6575 etc.





    BATTERY + USB Cable Way



    1. Switch the mobile Off
    2. Take out the battery and re-install the battery to the device.
    3. Now, Open Dragon Software
    4. Choose Dragon Box Port
    5. CheckBox (Box Connects in Specif port)
    6. Go to "MTK" Tab
    7. Un-tick "Scan Pinout" If you are doing with USB cable + Battery
    8. Choose "Format"
    9. Tick "Auto Format" if you don't know the Manual Format Address
    10. Choose "USB" (not COM)
    11. Click "Start"
    12. Now, Press the Boot Key and Connect the mobile to the computer with the help of USB Data Cable.

    Note: Boot Key might be Volume Down or Home Button etc.

    13. Wait and let the mobile install necessary drivers.
    14. Waits until you see "All Done"
    15. Done







    MAIN CABLE and +/- of Main Cable Way



    1. Device must be ticked "Development" Option.
    2. Connect Mobile with GPG Dragon Main Cable and +/- Cable from Main Cable (for power supply)
    3. Now, Open Dragon Software
    4. Choose Dragon Box Port
    5. CheckBox (Box Connects in Specif port)
    6. Go to "MTK" Tab
    7. Tick "Scan Pinout" If you are doing with Main Cable + Dragon Cable Power Supply (NO Battery)
    8. Choose "Format"
    9. Tick "Auto Format" if you don't know the Manual Format Address
    10. Choose "USB" (not COM)
    11. Now, Press the Boot Key and Click on "Start"

    Note: Boot Key might be Volume Down or Home Button etc.

    12. Wait and let the mobile install necessary drivers.
    13. Waits until you see "All Done"
    14. Done

  9. #9
    Product Promoter
    Join Date
    Dec 2011
    Posts
    121
    Thanks
    9
    Thanked 36 Times in 16 Posts
    How to Repair MTK IMEI With USB Method


    WIth the help of Dragon Main Cable + Main cable Power supply (Do not use Battery )

    1. Open the Dragon Software
    2. Choose "MTK" tab
    3. Tick "Scan Pinout"
    4. Choose "USB" (NOT COM Port)
    5. Now, Connect the Device With Dragon MAIN CABLE and its power cable (NOT Battery and USB cable)
    6. Click on "Start"
    7. Wait until the Yellow mark goes to 100% and turn Green
    8. Write Valid IMEI
    9. Click on "Write IMEI"
    10. Wait until IMEI Written.

    Done



    WIth the help of USB Cable and Battery (Do not use Dragon Main Cable and Power supply)

    1. Open the Dragon Software
    2. Choose "MTK" tab
    3. Untick "Scan Pinout"
    4. Choose "USB" (NOT COM Port)
    5. Click on "Start"
    6. Insert Battery + USB Cable and now connect to the computer
    7. Wait until the driver installed
    8. Now you will see Yellow mark goes upto 100% and it turns Green
    9. Write Valid IMEI
    10. Click on "Write IMEI"
    11. Wait until IMEI Written.
    Done


    NOTE: Sometimes you must ON Device, and choose Device Diagnostics Port to repair IMEI.


    STILL IMEI NOT CHANGING WHAT IS THE PROBLEM?

    Sometimes You changed the IMEI of 6252 (MTK) using Dragon Box, Still IMEI not changing, in such a case, follow the methods:

    1. Backup the flash file of the mobile
    2. Save it to the hard disk or portable device
    3. Write it back to the Device (Mobile)
    4. Check the IMEI
    5. Done


    Please USE only USB Method. COM method not supported yet.

  10. #10
    Product Promoter
    Join Date
    Dec 2011
    Posts
    121
    Thanks
    9
    Thanked 36 Times in 16 Posts
    Dragon Old Version

    Version 26


    http://www.4shared.com/rar/qSvmZtua/...agon_v326.html


    Version 3.33


    http://www.4shared.com/rar/fkjEaa9f/gpg_dragon_333.html




    Box Firmware



    Click to download Dragon Latest Firmware 1.63



    How to Upgrade Box Firmware



    Click to View - How to upgrade Dragon Firmware





    How to solve the Problem of Updating the Box firmware


    GPGDragon Firmware Update Guide


    BR
    Last edited by Gsm.universal; 03-05-2014 at 06:50 PM.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •