Dragon School<<< Problems and Solutions >>>

[SHIJILFONOTLY]

another simple track to solved the problem

problem : Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: A560.SW.V00.02.YIDALONG
Changing baudrate to 921600...

the dragon box just show these info nothing more , i try with all boot but same problem Same

Ans : A simple track Can solved This problem and Sure its is software problem ( not hardware ) Need to change Baudrate to 115200 and Check will be okay

[SHIJILFONOTLY]

Problem:- Initializing...
DA_LIB_VER_3.2.1.3
It is sensing the pinout fast...
D-=3 D+=0
BOOT set failure, continue to scan...
Sense failure

Solution:-Press and hold 0+power / 0&8 button on your handset for until process
here is video(PROVE)
[YOUTUBE]JlRXuuACJls[/YOUTUBE]
And I use this method on CHINA NOKIA B200(3 sim)

Br
RIZWAN JAT

[SHIJILFONOTLY]

problem :

Compare Image: Enable
Error: Failed to read ACK, Please select or cancel the ¡°Buff PGM¡±option in the global settings.



Note : If after mark Software Show the Error again Then its mean You need To check The Phone With hardware method


problem :

Reading FileSystem info...
Error: Get Flash die baseaddress

Ans : Need to Full Flash the Set , Formatting unlocking Not Support , for phone code power on code need to read full flash and read the code from flash files for more info check sticky thread

[SHIJILFONOTLY]

Problem : dragon box just show log

like this

Initializing...
DA_LIB_VER_3.2.2.7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC240200000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: LBBKY27.8.12.1.2T04M0125_M571
Changing baudrate to 921600...

ans : select low baudrate from list 115200 and once again try to format the set , working set format Done !

[SHIJILFONOTLY]

simple Method for 6225 flash chips phones (imei changing )

in (META option) Face Problem check log

Initializing...
DA_LIB_VER_3.2.2.7
Tip: The phone must be able to power-on normally
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...

mean phone not able to enter in META mode (using tracker )

Ans : simple method to solved the problem just select AT mode From imei tab list and try once again here is the log tested some models and working good

DA_LIB_VER_3.2.2.7
Tip: The phone must be able to power-on normally
Connecting...Please hold on the POWER key until the red gauge is going...
Connecting, Please turn on the phone...
Connected! Checking IMEI...
Original IMEI 1= 135790246811220
IMEI 1 rebuild has been implemented: 353056312399932
Original IMEI 2= 135790246811220
IMEI 2 rebuild has been implemented: 353056661690814
Need to restart the phone to verify new imei.

[SHIJILFONOTLY]

gpgdragon Support Ufone huawei G5500 Unlocking

1 make backup reading full flash

2 format the set using boot ver 2.1016 from boot list

3 rebuilt the imei using AT option From imei tab

4 DOne !

note : have a poor chip inside the phone [called mtk 6253 flash chip] so must make backup before here is the flash files link for user[Only registered and activated users can see links. ]

[SHIJILFONOTLY]

[SHIJILFONOTLY]

Problem

Programming...
Compare Image: Enable
Error: Erase Flash

Solution

You need remove tick from auto format option and format your handset and then try again flash

[SHIJILFONOTLY]

problem , i am trying to changed the imei of handset but get this problem so now what i do ?

Initializing...
DA_LIB_VER_3.2.2.8
It is sensing the pinout fast,please hold on the phone Power key
RXD=8 TXD=4
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Read info...ok, Waitting enter meta...
Connection time out.

AND : this type of problem comes from low power to phone etc


simple method to solved this problem using dragon box ,

step 1 , connect the power supply + and - to phone (phone + and - )

step 2 , connect the main cable - wire to GND of phone

step 3 , again try to changed the imei using tracker ( r Imei At option ) both working good already check many times ,

[SHIJILFONOTLY]

bitdefender anti vius,. how can i add to exclusion











Thanks goes to atskie for this hard work