Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,560
    Thanks
    2
    Thanked 51 Times in 41 Posts
    YXTEL C801 (16MB) Dead Repair Done
    Code:
    Available Ports:COM1 COM3 COM4 COM5 COM33 COM34 COM35

    Waiting for phone's response, press the Power on the phone..
    Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
    Reset USB device and search it...
    Find USB device:SPRD U2S Diag (COM5), (VID_1782&PID_4D00)


    Internal version: SPRD3
    Boot downloaded.
    Start boot please wait a moment....
    Spreadtrum Boot Block version 1.2
    CPU TYPE:SC6531 [65310000]
    FLASH ID: 002C00CB00180000
    Flash Type: SF_N25W128
    Size:0x1000000(16MB)
    Reading completed.
    The data has been saved in K:\MOCOR_12B_6531.W13.11_Release_20141219_151451_F ullFlash YXTEL C801 05b vol down.bin, size: 16 M.
    Reset USB device and search it...
    Find USB device:SPRD U2S Diag (COM5), (VID_1782&PID_4D00)

    Internal version: SPRD3
    Boot downloaded.
    Start boot please wait a moment....
    Spreadtrum Boot Block version 1.2
    CPU TYPE:SC6531 [65310000]
    FLASH ID: 002C00CB00180000
    Flash Type: SF_N25W128
    Size:0x1000000(16MB)
    >>Set to Factory successfully.

  2. #12
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,560
    Thanks
    2
    Thanked 51 Times in 41 Posts
    Videocon V1417 Blinking Repair Done
    Code:
    Detection initiated...
    Vcc: 10
    Gnd: 1 4
    Analyzing D+ and D-...
    D+ = 9, D- = 8
    Detection D+/D- with 1.75 seconds.
    Continue to detect BOOT pin...
    Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
    BOOT(Pull Down) = 6
    Setting...
    Find USB device:SCI USB2Serial (COM56), (VID_1782&PID_4D00)
    Pinouts setting complete!


    Internal version: SPRD3
    Boot downloaded.
    Start boot please wait a moment....
    Spreadtrum Boot Block version 1.2
    CPU TYPE:SC6531 [65310000]
    FLASH ID: 00C8006000160000
    Flash Type:[GD] 25LG32bWL
    Size:0x400000(4MB)
    Reading completed.
    The data has been saved in D:\FLASH FILES\SC6531\MOCOR_12C.W13.04.05_Release_20150224_ 194813_FullFlash Videocon V1417 {SC6531 [GD] 25LG32bWL} Cable - 12c.bin, size: 4 M.
    Detection initiated...
    Vcc: 10
    Gnd: 1 4
    Analyzing D+ and D-...
    D+ = 9, D- = 8
    Detection D+/D- with 1.30 seconds.
    Continue to detect BOOT pin...
    Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
    BOOT(Pull Down) = 6
    Setting...
    Find USB device:SCI USB2Serial (COM56), (VID_1782&PID_4D00)
    Pinouts setting complete!

    Internal version: SPRD3
    Boot downloaded.
    Start boot please wait a moment....
    Spreadtrum Boot Block version 1.2
    CPU TYPE:SC6531 [65310000]
    FLASH ID: 00C8006000160000
    Flash Type:[GD] 25LG32bWL
    Size:0x400000(4MB)
    Set to Factory successfully.

  3. #13
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,560
    Thanks
    2
    Thanked 51 Times in 41 Posts
    Videocon V1398 Lock Code Done
    Code:
    Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Detection D+/D- with 1.33 seconds.
    Continue to detect BOOT pin...
    Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
    UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4
    Setting...
    Find USB device:SCI USB2Serial (COM56), (VID_1782&PID_4D00)
    Pinouts setting complete!


    Internal version: SPRD3
    Boot downloaded.
    Start boot please wait a moment....
    Spreadtrum Boot Block version 1.2
    CPU TYPE:SC6531 [65310001]
    FLASH ID: 00C8006000160000
    Flash Type: SF_GD25LQ32
    Size:0x400000(4MB)
    Reading completed.
    The data has been saved in D:\FLASH FILES\SC6531\Videocon V1398 {SC6531 [SF_GD25LQ32]} Cable - 05b press 0 button.bin, size: 4 M.
    Screen Lock input order:




    Software has two ways to find password, it may have different results to click button again.
    Looking for passwords,please wait...
    [Phone Lock] 0000
    [Phone Lock] 725482
    [Phone Lock] 1234
    >>Looking for passwords complete.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •