Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,623
    Thanks
    5
    Thanked 57 Times in 45 Posts

    GcproKey Exclusive Frequently Asked Questions

    Here is frequently asked question for GCPro users.



    Best Regards,
    GCPro_Team
    www.gcprokey.com

  2. #2
    Product Author
    Join Date
    Mar 2014
    Location
    china
    Posts
    13
    Thanks
    0
    Thanked 3 Times in 3 Posts
    Question
    I have received GCPro.What next ?


    Answer.(Box or dongle same steps)

    1. Please download latest update from www.gcprokey.com
    2. Once you download latest setup. install it.
    3. Now you see on desktop shortcut GCPro UPDATE Tool. open this.
    4. Select UPDATE GCPro.(You can select english,chinese,russian,spanish more will be added)
    5. Press Start.Wait till finish. (If its say not allowed please ignore it.)
    6. Once finish select Register GCPro.
    7. If its say not allowed on Register GCPro. please contact Reseller only he can help.
    8. If you buy directly from www.gcprokey.com you can contact GPG sales team they will help.

  3. #3
    Product Author
    Join Date
    Mar 2014
    Location
    china
    Posts
    13
    Thanks
    0
    Thanked 3 Times in 3 Posts
    Question
    How to unlock Samsung sprint most model with GCPro?


    Answer.(Box or dongle same steps)

    1. Make sure you are using Latest update.
    2. Select model (samsung usb serial port J327P U3 temp unlock or N900P Only else not need)
    3. Method 1: If phone firmware is combination or combination modem is used in samsung tab, select Sprint Unlock & press Start
    4. Method 2: if phone is stock firmware & newer then last 3 digit PDx[x=0 to anything ] You must root phone. in samsung tab, select sprint unlock & press start.
    5. For sprint spc/msl read only, you can use UART method SPC/AKEY or use sprint unlock without root.




    Note:S9/S9+ SPRINT is via credits only supported at moment. http://forum.gpgindustries.com/showt...4976#post74976
    Note2:J337,J727P U3,J737P,NOTE9,S10 SPRINT is not supported.
    Last edited by GCPRO_HELP; 04-28-2019 at 10:36 AM.

  4. #4
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,623
    Thanks
    5
    Thanked 57 Times in 45 Posts
    • From where to Download FREE Cert ?
      • Go to Support Area





      • Download "FREE_GC_CERTS_33.rar"
        • These CERT is Compatible only & only with GCProKey Software !!


        Here is list of CERT Available !!
        Code:
        
        GCPRO_357554xxxxxx_G361F_MANY_PXA_0001_gc.cert
        
        
        GCPRO_351559xxxxxxxxx_G920_G925_ANYEXY_0346 _.cert
        GCPRO_351665xxxxxxxxx_N750_EXY_0640_gc.cert
        GCPRO_352309xxxxxxxxx_G7102.cert
        GCPRO_352554xxxxxxxxx_352555xxxxxxxxx_G355HANY_J100F_0118_gc.cert
        GCPRO_352558xxxxxxxxx_G900M,F,A,T_ANYQC.cert
        GCPRO_352558xxxxxxxxx_G900M,F,A,T_ANYQC.cert
        GCPRO_352608xxxxxxxxx_I9301I_0865_gc.cert
        GCPRO_352901xxxxxxxxx_N7502_0839_gc.cert
        GCPRO_353110xxxxxxxxx_G900M,F,A,T_ANYQC.cert
        GCPRO_353284xxxxxxxxx_G900H_EXY.cert
        GCPRO_353285xxxxxxxxx_G900H_EXY.cert
        GCPRO_353415xxxxxxxxx_G900H_EXY.cert
        GCPRO_355167xxxxxxxxx_I9500_EXY_.cert
        GCPRO_355167xxxxxxxxx_I9500_EXY_.cert
        GCPRO_355427xxxxxxxxx_G850Y_G850F_0932_gc.cert
        GCPRO_355585xxxxxxxxx__G850A_G8508S_G850W_0793_gc.cert
        GCPRO_355698xxxxxxxxx_355699xxxxxxxxx_I8262_0086_gc.cert
        GCPRO_355847xxxxxxxxx_I9515_gc.cert
        GCPRO_356095xxxxxxxxx_N910T,F,A,W8_0772_.cert
        GCPRO_356886xxxxxxxxx_G110H_0093_gc.cert
        GCPRO_357092xxxxxxxxx_357091xxxxxxxxx_I8552_0246_gc.cert
        GCPRO_357138xxxxxxxxx_I9500_EXY_.cert
        GCPRO_357201xxxxxxxxx_357202xxxxxxxxx_G313ANY,G316ANY_0117_gc.cert
        GCPRO_357504xxxxxxxxx_I9500_EXY_.cert
        GCPRO_357633xxxxxxxxx_I9500_0833.cert
        GCPRO_357633xxxxxxxxx_I9500_EXY_.cert
        GCPRO_35789xxxxxxxxxx_I9500_0833.cert
        GCPRO_35802xxxxxxxxxx_N900ANY_.cert
        GCPRO_358917xxxxxxxxx_N900ANY_.cert
        GCPRO_358917xxxxxxxxx_N900ANY_.cert
        GCPRO_359092xxxxxxxxx_N900ANY_.cert
        GCPRO_359542xxxxxxxxx_N900ANY_.cert





    IMEICERT FORMAT.
    [CERT] MUST START WITH THIS.
    ;INFO WWW.GCPROKEY.COM ; USED TO SEPARATE ; MSL:=XXXX ; SKEY:=XXXX;
    Model= XXXXX NOT IN USE CAN BE ANYTHING.
    SerNo= 11 DIGIT SERIAL NO CAN USE HERE TO WRITE AT CERT WRITING TIME.
    IMEI=XXXXXXXXXXX IMEI 1 FOR DEVICE MUST BE HERE.
    ImeiSign=XXX SHOULD BE HERE
    PubKey=XXX SHOULD BE HERE
    PubKeySign=XXX SHOULD BE HERE
    MEID=XXXXX IF PHONE IS IMEI + MEID BASE.
    IMEI2=XXXXXX IMEI 2 SHOULD BE HERE..
    ImeiSign2=XXX IMEI 2 SIGN SHOULD BE HERE No need pubkey and pubkeysign because it's same as imei 1.
    IMEI3= XXXX IF PHONE HAVE MORE THEN 2 IMEI.
    MSL= XXXX IF HAVE MSLCODE TO USE WITH CERT WRITE.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  5. #5
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,623
    Thanks
    5
    Thanked 57 Times in 45 Posts
    Samsung Exynos Phones for direct unlock via credits supported Version list will be updated here.


    • A105GDXU2ASE3
      A105FDDU1ASC9
      A105FDDU1ASE2
      A105FNXXU2ASF4
      A105FNXXS2ASI1
      A105FNXXU2ASJ2
      A105MUBU4ASK1
      A205YNDVU1ASD5
      A205YNDVU2ASF2
      A202FXXU2ASH1
      A202FXXU2ASJ1
      A202FXXU3ASL3
      A205FDDU1ASC6
      A205GNDXU4ASK2
      A205YNDVU2ASI2
      A260GDDU1ASD3
      A260GDDU2ASG2
      A260GDDU3ASJ1
      A305FXXU1ASBA
      A305FXXU2ASF3
      A305FXXU2ASI1
      A305FXXU2ASE5
      A305GDXU1ASD2
      A305YNDVU2ASE5
      A305YNDVU2ASI1
      A405FNXXU2ASJ1
      A505FXXU1ASB7
      A505FXXU2ASH3
      A505FXXU3ASK2
      A505FXXU3ASL6
      A520WVLS9CSI1
      A530FXXU8CSK3
      A600AUCU4ASF1
      A600FNXXU3BSD2
      A600AZTUS4BSE1
      J260AUCU2ASE1
      J260GDDU1ARGC
      J260GDDU2ARJ9
      J260T1UVS2ASD4
      J260T1UVU3ASH1
      J260T1UVS3ASI2
      J260T1UVS3ASG1
      J260T1UVS4ATA1
      J320AZTUS4ARA1
      J327TUVS4ASH2
      J336AZTUU5ASB2
      J337AUCU3ARJ1
      J337AUCS7BSH1
      J337AZTUU5ASB2
      J337AZTUS7ASH1
      J337TUVS4ASD1
      J337TUVS5ASH2
      J337TUVS6ASK2
      J337TUVS7ATA1
      J600FXXS5BSH2
      J600FXXU3BSCA2
      J727AUCS5BSC2
      J727AZTUS1AQJ1
      J727AZTUU1AQK6
      J727AZTUS3ARD1
      J727AZTUS3ARF1
      J727AZTUS4BRL1
      J727AZTUU3BRJ2
      J727TUVU3ARA1
      J727TUVS6BSI2
      J727TUVS5BSC2
      J727T1UVS6BSI2
      J701MUBU6CSF1
      J737AUCS2ARH1
      J737AUCU3ARJ1
      J737AUCS4ASD1
      J337AUCS6ASE1
      J737AUCS6BSK1
      J737TUVU5BSI2
      J737TUVS6BSK1
      J737T1UVU2ARH9
      J737T1UVS3ARK1
      J737T1UVS5ASE1
      G570MUBS6CSI1
      G955FXXU6DSK5
      G960FXXU2CSC1
      G960FXXS3CSD2
      G960FXXU4CSE1
      G960FXXU7CSJ5
      G960FXXU7CSI6
      G965FXXU1ARB1
      G965FXXU2BRJ1
      G965FXXU4CSE1
      G965FXXU7CSI6
      G965FXXU7DTA3
      G965NKOU1ARJ1
      G970FXXU1ASBA
      G970FXXU1ASC8
      G973FXXS3ASJA
      G973FXXU3ASG8
      G973FXXU1ASD4
      G973FXXU1ASBA
      G973FXXU3ASJ4
      G975FXXU1ASC8
      G975FXXS3ASJA
      G975FXXU3ASG8
      G975FXXS3ASG2
      G975FXXU3ASIE
      G977BXXS2ASH6
      N950FXXS8DSK1
      N950FXXS9DTA1
      N960FXXS4CSJ1
      N970FXXU1ASIC
      N975FXXU1ASHE
      N970FXXS1ASJ2
      N975FXXU1ASI1
      N976BXXU1ASHF
      N976BXXS1ASJ8
      N976BXXU1ASIE
      S102DLUDU1ASGA
      S102DLUDS2ASJ1
      S102DLUDU2ASI5
      S205DLUDU1ASGA
      S205DLUDU2ASK2
      S205DLUDU2ASI2
      S205DLUDS3ATB1
      S260DLUDU3BSI5
      S337TLUDU1AQD1
      S337TLUDU1AQF1
      S337TLUDU2AQG2
      S337TLUDS3ARD3
      S337TLUDS4ARG1
      S337TLUDS5BSE1
      S337TLUDS6BSG2
      S337TLUDS7BSK1
      S357BLUDU3BSH3
      S506DLUDU1ASH1
      S506DLUDS2ASJ1
      S506DLUDU2ASI4
      S506DLUDU3ASL5
      S506DLUDS4ATA3
      S550TLUDU2API2
      S550TLUDU2AQC4
      S737TLUDS4BSE1
      S737TLUDS5BSG2
      S737TLUDS6BSJ1
      S757BLUDU1ARI2
      S757BLUDU1ARL3
      S757BLUDU2ASC2
      S757BLUDU3BSH2
      S757BLUDS4BSJ1
      S767VLUDS4BSJ1


    For steps please read this STEPS TO EXYNOS UNLOCK HERE
    HAVE UNSUPPORTED ? PRESS YES TO READ BACKUP AND YES TO SEND BACKUP WE WILL SUPPORT IT INSTANT.

    Best Regards,
    GCPro_Team
    www.gcprokey.com
    Last edited by stanner_austin; 03-11-2020 at 09:43 AM. Reason: updated 11-03-2020

  6. #6
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,623
    Thanks
    5
    Thanked 57 Times in 45 Posts
    • GCPro Troubleshooting.
    • Problem: Error 0x82 Security
      • Solution:
        • Uninstall complete GCPRO setup/update/installed files from your computer.
        • ReDownload & Install GCPRO latest setup from Support Area
        • Add C:\GCPro_Team\ folder into TRUSTZone/Exclude on your AntiVirus
        • These above steps should solve your problem. but somehow if still getting same error then you have to clean your pc from any malware & virus by any AntiMalware & AntiVirus.
        • This error only comes only when your windows is VIRUS INFECTED AND CORRUPTED GCPro ADB_SERVICE\adb.exe.




    Best Regards,
    Osva
    GPGIndustries
    Management Team

  7. #7
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,623
    Thanks
    5
    Thanked 57 Times in 45 Posts
    How to use RLOCK ADB = REACTIVATION REMOVE ON QCOM samsung device..
    Answer
    You must have STOCK 5.1 or newer .
    You must have ADB & ROOT. TEMP root also ok. use google or search in forum to get more idea how to do it. if you can't sorry no other option we have.


    We have uploaded most of ENG ROOT at support and they are latest firmware so flash your device with need firmware first.


    Scan port & select samsung modem port before start.
    Go to samsung tab select RLOCK ADB.
    Select any model GCPro do not care models at most case.
    Press start follow steps.


    In case any error please format and re do.. if still say post log by making new thread do not forget to post all log in text format no images or files please.


    Most engineering root is already at support..
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  8. #8
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,623
    Thanks
    5
    Thanked 57 Times in 45 Posts
    How to REMOVE REACTIVATION ON EXYNOS samsung device with root.
    Answer
    If you already have flashed ENG ROOT Please use FRP REMOVE (ADB) this will clear FRP & REACTIVATION & screen lock,pattern,password etc same time..


    We have uploaded most of ENG ROOT at support and they are latest firmware so flash your device with need firmware first.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  9. #9
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,623
    Thanks
    5
    Thanked 57 Times in 45 Posts
    How to FRP,REACTIVATION LOCKS ON EXYNOS samsung device VIA FRP_UFS OLD device with UART C3303K ?
    Answer
    Please connect any FTDI box plug C3303K cable & make sure you know port number. do not need COM,VCP etc. only number REMEMBER IT.


    Please connect phone in download mode. plug usb scan port select samsung modem port.


    Select FRP_UFS press start.
    Wait till reading finish.. software will restart phone to normal mode. do not press OK on it.


    Power off your phone fully.in GCPro software enter box port only number press OK


    Software will start searching your phone.. now connect POWERED OFF phone by pressing VOLUME DOWN Always AND POWER KEY only for first 2 sec. if software detect it release key pressing.


    If some reason not detected follow process again power off device fully, press VOLUME DOWN AND POWER KEY 2 sec only.


    Once detected it will remove FRP,REACTIVATION,EELOCK same time.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  10. #10
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,623
    Thanks
    5
    Thanked 57 Times in 45 Posts
    HOW TO READ CERT WITH EXYNOS UNLOCK AND DIAG PORT?
    Answer
    Start phone fully make sure stock firmware is in phone. in some case you may need combination MODEM only not full flash.


    Dial *#0808# select LAST OPTION..(some case you may need to reboot)
    Scan port and select "SAMSUNG Mobile USB Serial Port" in GCPro .
    Go to samsung tab select Exynos unlock. Press start if ask for direct unlock press NO if you just wanted to read cert or code.

    If you face any issue Please report by making thread and attach full log.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •