Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,620
    Thanks
    3
    Thanked 54 Times in 42 Posts
    How to use RLOCK ADB = REACTIVATION REMOVE ON QCOM samsung device..
    Answer
    You must have STOCK 5.1 or newer .
    You must have ADB & ROOT. TEMP root also ok. use google or search in forum to get more idea how to do it. if you can't sorry no other option we have.


    We have uploaded most of ENG ROOT at support and they are latest firmware so flash your device with need firmware first.


    Scan port & select samsung modem port before start.
    Go to samsung tab select RLOCK ADB.
    Select any model GCPro do not care models at most case.
    Press start follow steps.


    In case any error please format and re do.. if still say post log by making new thread do not forget to post all log in text format no images or files please.


    Most engineering root is already at support..
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  2. #12
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,620
    Thanks
    3
    Thanked 54 Times in 42 Posts
    How to REMOVE REACTIVATION ON EXYNOS samsung device with root.
    Answer
    If you already have flashed ENG ROOT Please use FRP REMOVE (ADB) this will clear FRP & REACTIVATION & screen lock,pattern,password etc same time..


    We have uploaded most of ENG ROOT at support and they are latest firmware so flash your device with need firmware first.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  3. #13
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,620
    Thanks
    3
    Thanked 54 Times in 42 Posts
    How to FRP,REACTIVATION LOCKS ON EXYNOS samsung device VIA FRP_UFS OLD device with UART C3303K ?
    Answer
    Please connect any FTDI box plug C3303K cable & make sure you know port number. do not need COM,VCP etc. only number REMEMBER IT.


    Please connect phone in download mode. plug usb scan port select samsung modem port.


    Select FRP_UFS press start.
    Wait till reading finish.. software will restart phone to normal mode. do not press OK on it.


    Power off your phone fully.in GCPro software enter box port only number press OK


    Software will start searching your phone.. now connect POWERED OFF phone by pressing VOLUME DOWN Always AND POWER KEY only for first 2 sec. if software detect it release key pressing.


    If some reason not detected follow process again power off device fully, press VOLUME DOWN AND POWER KEY 2 sec only.


    Once detected it will remove FRP,REACTIVATION,EELOCK same time.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  4. #14
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,620
    Thanks
    3
    Thanked 54 Times in 42 Posts
    HOW TO READ CERT WITH EXYNOS UNLOCK AND DIAG PORT?
    Answer
    Start phone fully make sure stock firmware is in phone. in some case you may need combination MODEM only not full flash.


    Dial *#0808# select LAST OPTION..(some case you may need to reboot)
    Scan port and select SAMSUNG USB TO SERIAL port in GCPro software.
    Go to samsung tab select Exynos unlock. Press start wait till finish..


    If you face any issue Please report by making thread and attach full log.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  5. #15
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,620
    Thanks
    3
    Thanked 54 Times in 42 Posts
    Question
    I have received GCPro.What next ?


    Answer.(Box or dongle same steps)

    1. Please download latest update.
    2. Once you download latest setup. install it.
    3. Now you see on desktop shortcut GCPro UPDATE Tool. open this.
    4. Select UPDATE GCPro.(You can select english,chinese,russian,spanish more will be added)
    5. Press Start.Wait till finish. (If its say not allowed please ignore it.)
    6. Once finish select Register GCPro.
    7. If its say not allowed on Register GCPro. please contact Reseller only he can help.
    8. If you buy directly from www.gcprokey.com you can contact GPG sales team they will help.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  6. #16
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,620
    Thanks
    3
    Thanked 54 Times in 42 Posts
    Question
    How to unlock Samsung sprint most model with GCPro?


    Answer.(Box or dongle same steps)

    1. Make sure you are using Latest update.
    2. Select model (samsung usb serial port J327P U3 temp unlock or N900P Only else not need)
    3. Method 1 If phone firmware is combination or combination modem is used in samsung tab, select Sprint Unlock & press Start
    4. Method 2 if phone is stock firmware & newer then last 3 digit PDx[x=0 to anything ] You must root phone. in samsung tab, select sprint unlock & press start.
    5. For sprint spc/msl read only, you can use UART method SPC/AKEY or use sprint unlock without root.




    Note:S9/S9+ SPRINT is via credits only supported at moment.
    Note2:J337,J727P U3,J737P,NOTE9,S10 SPRINT is not supported.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  7. #17
    Board of Directors
    Join Date
    Nov 2011
    Posts
    21
    Thanks
    0
    Thanked 4 Times in 3 Posts
    Question
    How to unlock S10/S10E/S10 5G/NOTE 10/ NOTE 10+ with GCPro?

    Answer.(Box or dongle same steps)

    1. Make sure you are using Latest update.
    2. Select any model. go to samsung tab. make sure USB DEVELOPER MODE ( ADB) IS ENABLED.
    3. Select ADB Unlock & Make sure Tick on USE SERVER on top right. Press START Now phone is unlocked if ask enter 00000000.
      Note:Only ATT/CCT supported any other will charge credit but will not unlock. You can ask refund via live chat or skype we will refund once not always if you continue doing such mistake..


    Question
    How to unlock S8/S8+/S8EDGE/NOTE8/S9/S9+ APPLICATION LOCKED with GCPro?

    Answer.(Box or dongle same steps)

    1. Make sure you are using Latest update.
    2. Select any model. go to samsung tab. make sure *#0808# selected last option. scan port and select "SAMSUNG USB SERIAL PORT".
    3. Select T-MOBILE Unlock & Make sure Tick on USE SERVER. Press START wait till finish now is unlocked.
      Note:Some models may need to flash COMBINATION Modem before start do not worry software will not CHARGE Credits for it. GCPro will charge credits only if your doing all steps correctly.



    Question
    How to unlock S8/S8+/S8EDGE/NOTE8/S9/S9+ ATT/CCT/OTHER CODE ASKING with GCPro?

    Answer.(Box or dongle same steps)

    1. Make sure you are using Latest update.
    2. Select any model. go to samsung tab. make sure *#0808# selected last option. scan port and select "SAMSUNG USB SERIAL PORT".
    3. Select NEWQC Unlock & Make sure Tick on USE SERVER. Press START Now phone is unlocked if ask enter 00000000.
      Note:Some models may need to flash COMBINATION Modem before start do not worry software will not CHARGE Credits for it. GCPro will charge credits only if your doing all steps correctly.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •