Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Hybrid View

  1. #1
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,625
    Thanks
    5
    Thanked 54 Times in 42 Posts

    GcproKey Exclusive Frequently Asked Questions

    Here is frequently asked question.for gcprokey users.


    Q) How to read imeicert?
    A) You can not read qc(qualcomm)qcom phones certificates at present.. no other tool can do even.
    1) Device should be rooted software will show you NOT ROOTED if its not rooted.
    2) open gcprogsmtool go to samsung tab.
    3) Select IMEICERT Read and press Start.
    ----------------------------------------------
    Q) How to unlock HUAWEI ANDROID?
    A) To unlock HUAWEI ANDROID most device please power on phone.enable usb developer mode(ADB,) and insert usb cable.
    1) Device should be rooted software will show you NOT ROOTED if its not rooted.
    2) open gcprogsmtool go to Huawei tab.
    3) Press UNLOCK button wait till its finish.
    Note: if your device is mtk its give you unlock code enter to phone to make it unlocked.
    Note2: if you phone is QC its make direct unlocking.
    ----------------------------------------------
    Q) How to unlock MTK ANDROID?
    A) To unlock MTK ANDROID most device please power on phone.enable usb developer mode(ADB,) and insert usb cable.
    1) Device should be rooted software will show you NOT ROOTED if its not rooted.
    2) open gcprogsmtool go to android tab.
    3) Press MTK SIMUNLOCK button once its finish you have your phone code.
    ----------------------------------------------
    Q) How to repair samsung android original phone imei?
    A) Imei restore is only to restore original imei or service imei to test network functions any use of our software for any bad activity we are not responsible check your country law before continue.
    1) Power off handset.plug uart(RJ45) c3303k cable let it self power on.
    2) If phone is not self power on check cable or on manually. enter imei number in imei / meid box.
    3) Press Restore imei software will ask you to enter serial number must enter this check at phone back if you don't have any use any other handset serial.
    4) wait till finish.in case of any error please make your own thread post log for help.

    note: At time of restoring imei it will automatic fix wifi mac,serial number,factory test mode,cal date etc you don't have to do anything,unless there is RF restore need for most new QCOM devices.
    ----------------------------------------------
    Q) Do i have to reset efs every time i write imei?
    A) Answer is NO. GCPRO do not need reset efs if device meid,imei is repaired by gcpro before.
    YOU CAN WRITE ANY TIME ANY IMEI WITHOUT ROOT,WITHOUT RESET,WITHOUT ANY NVITEMS READ WRITE.(Only if its repaired successfully once in his life with GCPROKEY & not try on other tool)
    ----------------------------------------------
    Q) Can i repair samsung android original phone imei?
    A) Yes most of it we do not have list at moment will come soon.You can give a try its fast and safe.read above steps.
    ----------------------------------------------
    Q) Can i repair samsung android original phone imei 00000000000000?
    A) Yes you can,Please follow imei repair steps. incase of error first use ResetEFS button to rebuild security.in case of still fail please make your own thread post all logs.
    ----------------------------------------------
    Q) Do i need root samsung android phone Restore IMEI?
    A) No,restore imei we have enable only for damaged phones, most phone who damage imei in use for example imei 0049xxx or imei 00/ . continue direct imei repairing steps.in case of fail please make your own thread post all logs.
    ----------------------------------------------
    Q) Can i repair samsung android phone MEID?
    A) Yes you can,steps are exactly same as Restore IMEI just press Restore MEID and enter proper MEID. (version 0005 or new must use.)
    ----------------------------------------------
    Q) How to repair samsung baseband unknown or null null imei?
    A) Most of this handset damaged due to hardware also. please note this is 50/50 chance to be work.
    1) Device must have adb on and rooted to use this option.
    2) Plug usb cable to power on phone. tick on ADBUSB scan and press scan port.
    3) Go to samsun tab click on ResetEFS
    4) After repair your device imei will be 00/ or 0049 make repair imei to make it working again. in case of fail please report at forum by making your own thread and post all logs.
    ----------------------------------------------
    Q) How to resetEFS make 00/ or 0049 imei on working phone?
    A) Steps are exactly same ResetEFS and follow same steps as above.
    ----------------------------------------------
    Q) My model/phone is not supported in resetEFS what i do?
    A) Please post full log by making new thread at support forum.also attach \backup\yourdeviceid\gcprokey1_xxxx.gc file so we can check and make it supported.
    ----------------------------------------------
    Q) What is IMEICERT or IMEISIGN,Your tool can repair it ?
    A) NO,Not yet,WIP. you can use Super imei(DEV IMEI) to skip imeicert or imeisign check when using restore imei button.
    *#0011# dial this code to check imeicert or imeisign pass or fail.
    Phone may show network but when make call show network is not register.its sign of imeicert or imeicert fail.
    Its security made by samsung to avoid people change there handset imei/meid.its possible to bypass on older model by patch but on new like s4 new bootloader,note3,s5 its not yet possible till date.
    ----------------------------------------------
    Q) What is REG-UNLOCK when to use?
    A) REG_UNLOCK is for most new device safe unlocking without damaging there security or imei.
    This method is super safe you do not have to worry about any damage during unlock. you can test on any unsupported baseband to make sure it work or not.
    1) Phone must be rooted and usb debugging must be on.Phone must have sim card in it and ask for code.
    2) Phone baseband should be in supported range( > XXXMJ2) .
    3) Go to samsung tab and press REG_UNLOCK once phone restart.please make RJ45 info to make sure its unlocked or not.
    ----------------------------------------------
    Q) What is ADB-UNLOCK when to use?
    A) ADB_UNLOCK is for older models with nv_data.bin safe unlocking and permanent unlocking. & new sprint samsungs.
    1) Phone must be rooted and usb debugging must be on.
    2) Go to samsung tab and press ADB_UNLOCK once phone restart test phone.
    ----------------------------------------------
    Q) How to unlock LATEST SPRINT DEVICE FROM SAMSUNG? WITH GCPROKEY
    [B]A)Use latest version 0012.
    1) ENABLE USB DEVELOPER MODE (ADB ..no root need.)
    2) Plug usb cable to phone make sure all drivers ok and open GCPROGSMTOOL.
    3) Select samsung cdma > go to samsung tab.
    4) Select task from list SPRINT Unlock press START.
    5) Wait till phone restart job done test phone..
    ----------------------------------------------
    Q) Can i repair google account,pattern code, password etc ""WITHOUT ROOT WITH ADB"" on SAMSUNG Android?
    A) Yes you can,we have 1 exclusive method work on 4.2.x to 4.4.1
    1) If you can not root your phone NO problem easy fix with gcprokey.
    2) Just connect it go to samsung tab > remove pattern adb
    3) software will check if not rooted it will remove pattern without root.
    4) power off & on if not auto restarted by software..
    ----------------------------------------------
    Q) Can i repair google account,pattern code, password etc ""WITHOUT ADB"" on SAMSUNG Android?
    A) Yes you can,we have 3 method normal and special & enable adb.
    1) Scan port select modem port. click on Remove pattern MODEM.
    2) Most users forgot to restart handset please power off handset & power on manually..
    3) After restart it may ask pattern,pin code please draw any pattern or enter any pin or backup pin to open menu. it will accept it.
    4) Last case if point 3 fail tick on special and re do remove pattern this will open menu temporary enable usb debugging and root handset make remove pattern from android tab.
    5) Only if point 4 used,press FIX samsung no onoff menu wait till finish.

    For enable adb use modem port and button "ENABLE ADB" will active adb device for that phone permanent.
    ----------------------------------------------
    Q) How to repair MTK Android copy phones imei?
    A) 1) Plug usb cable to power on phone. tick on ADBUSB scan and press scan port.
    2) Go to android tab and click on MTK Imei repair software will ask you to enter imei.
    3) If your phone tab is single imei press cancel on when it ask for single imei,wait till finish.
    3) Incase if its show "NON ROOTED DEVICE" & not supported please use impactor,saferoot,vroot,kingoroot,srsroot,towelroo t,custom recovery, etc to do your rooting job.
    ----------------------------------------------
    Q) How to repair ALLWINNER A10 TO A20 Android tablets imei?
    A) 1) Plug usb cable to power on phone. tick on ADBUSB scan and press scan port.
    2) Go to android tab and click on AXX Imei repair software will ask you to enter imei.
    3) If your phone tab is single imei press cancel on when it ask for single imei,wait till finish.
    ----------------------------------------------
    Q) How to repair google account,pattern code, password etc on any android?
    A) Device must have adb on and rooted to use this option.
    1) Plug usb cable to power on phone. tick on ADBUSB scan and press scan port.
    2) Go to android tab and click on Remove pattern.wait till finish.
    3) If you have issue with NON ROOTED DEVICE.. please use impactor,saferoot,vroot,kingoroot,srsroot etc to do your rooting job.
    ----------------------------------------------
    Q) I am getting "NON ROOTED DEVICE" error what i do?
    A) Device must be rooted to use this option.please use impactor,saferoot,vroot,kingoroot,srsroot,towelroo t,custom recovery, etc to do your rooting job.
    ----------------------------------------------
    Q) Where logs save?
    A) Near exe at LOG folder.
    ----------------------------------------------
    Q) Where backup of my phones saved?
    A) Near exe at \backup\ folder. for zte its \ztebackup\ folder.
    ----------------------------------------------
    Q) How can i make tar for samsung original phones security backup?
    A) added in version 0007 while using resetefs it will make security backup factoryrestore.tar in same backup folder. You can use ODIN to reflash backups.
    ----------------------------------------------
    Q) Can i repair SPD,QCOM phone or tablet imei?
    A) NO NOT YET,WIP..
    ----------------------------------------------
    Q) Can i repair SPD,QCOM phone or tablet gtalk,pattern,password,pin without ADB?
    A) NO NOT YET,WIP..
    ----------------------------------------------
    Q) UPDATETOOL show error. "Card is not Allowed to Active Contact reseller to active card."
    A) Contact reseller and tell them to active card on server for you.no other option. Please visit this link also for more info... I just Bought GcPro-Key - How & Where to Start ?
    ----------------------------------------------
    Q) Why not full model list till date?
    A) We made solution base for cpu,but we are trying as we can to make list of supported samsung phones.our software do not need models to be selected valid on gsmtool, it will manage automatic.

    Q) Where to get updates,setup,updatetool or driver etc?
    A) GCPROKEY go to download section.
    A) I just Bought GcPro-Key - How & Where to Start ?

    Q) What are current update version?
    A) GCPROGSM:=0013,GCPROZTE:=0003,GCPROHUAWEI:=0001,GC PROMULTI:=0001 .



    Regards,
    Chevli

  2. #2
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,625
    Thanks
    5
    Thanked 54 Times in 42 Posts
    Q) How to unlock LATEST SPRINT DEVICE FROM SAMSUNG? WITH GCPROKEY
    A)Use latest version.
    1) ENABLE USB DEVELOPER MODE (ADB ..no root need.)
    2) Plug usb cable to phone make sure all drivers ok and open GSMTOOL.
    3) GSMTOOL select samsung cdma > go to samsung tab.
    4) Press ADB_UNLOCK software will ask you do you want to unlock sprint?
    5) Press YES to unlock most sprint devices.

    Regards,
    Chevli
    GCProKey Team

    GCPROKEY

  3. #3
    Product Author
    Join Date
    Mar 2014
    Location
    china
    Posts
    13
    Thanks
    0
    Thanked 3 Times in 3 Posts
    Question
    How to unlock Samsung sprint most model with GCPro?


    Answer.(Box or dongle same steps)

    1. Make sure you are using Latest update.
    2. Select model (samsung usb serial port J327P U3 temp unlock or N900P Only else not need)
    3. Method 1: If phone firmware is combination or combination modem is used in samsung tab, select Sprint Unlock & press Start
    4. Method 2: if phone is stock firmware & newer then last 3 digit PDx[x=0 to anything ] You must root phone. in samsung tab, select sprint unlock & press start.
    5. For sprint spc/msl read only, you can use UART method SPC/AKEY or use sprint unlock without root.




    Note:S9/S9+ SPRINT is via credits only supported at moment. http://forum.gpgindustries.com/showt...4976#post74976
    Note2:J337,J727P U3,J737P,NOTE9,S10 SPRINT is not supported.
    Last edited by GCPRO_HELP; 04-28-2019 at 11:36 AM.

  4. #4
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,625
    Thanks
    5
    Thanked 54 Times in 42 Posts
    • From where to Download FREE Cert ?
      • Go to Support Area





      • Download "FREE_GC_CERTS_33.rar"
        • These CERT is Compatible only & only with GCProKey Software !!


        Here is list of CERT Available !!
        Code:
        
        GCPRO_357554xxxxxx_G361F_MANY_PXA_0001_gc.cert
        
        
        GCPRO_351559xxxxxxxxx_G920_G925_ANYEXY_0346 _.cert
        GCPRO_351665xxxxxxxxx_N750_EXY_0640_gc.cert
        GCPRO_352309xxxxxxxxx_G7102.cert
        GCPRO_352554xxxxxxxxx_352555xxxxxxxxx_G355HANY_J100F_0118_gc.cert
        GCPRO_352558xxxxxxxxx_G900M,F,A,T_ANYQC.cert
        GCPRO_352558xxxxxxxxx_G900M,F,A,T_ANYQC.cert
        GCPRO_352608xxxxxxxxx_I9301I_0865_gc.cert
        GCPRO_352901xxxxxxxxx_N7502_0839_gc.cert
        GCPRO_353110xxxxxxxxx_G900M,F,A,T_ANYQC.cert
        GCPRO_353284xxxxxxxxx_G900H_EXY.cert
        GCPRO_353285xxxxxxxxx_G900H_EXY.cert
        GCPRO_353415xxxxxxxxx_G900H_EXY.cert
        GCPRO_355167xxxxxxxxx_I9500_EXY_.cert
        GCPRO_355167xxxxxxxxx_I9500_EXY_.cert
        GCPRO_355427xxxxxxxxx_G850Y_G850F_0932_gc.cert
        GCPRO_355585xxxxxxxxx__G850A_G8508S_G850W_0793_gc.cert
        GCPRO_355698xxxxxxxxx_355699xxxxxxxxx_I8262_0086_gc.cert
        GCPRO_355847xxxxxxxxx_I9515_gc.cert
        GCPRO_356095xxxxxxxxx_N910T,F,A,W8_0772_.cert
        GCPRO_356886xxxxxxxxx_G110H_0093_gc.cert
        GCPRO_357092xxxxxxxxx_357091xxxxxxxxx_I8552_0246_gc.cert
        GCPRO_357138xxxxxxxxx_I9500_EXY_.cert
        GCPRO_357201xxxxxxxxx_357202xxxxxxxxx_G313ANY,G316ANY_0117_gc.cert
        GCPRO_357504xxxxxxxxx_I9500_EXY_.cert
        GCPRO_357633xxxxxxxxx_I9500_0833.cert
        GCPRO_357633xxxxxxxxx_I9500_EXY_.cert
        GCPRO_35789xxxxxxxxxx_I9500_0833.cert
        GCPRO_35802xxxxxxxxxx_N900ANY_.cert
        GCPRO_358917xxxxxxxxx_N900ANY_.cert
        GCPRO_358917xxxxxxxxx_N900ANY_.cert
        GCPRO_359092xxxxxxxxx_N900ANY_.cert
        GCPRO_359542xxxxxxxxx_N900ANY_.cert





    IMEICERT FORMAT.
    [CERT] MUST START WITH THIS.
    ;INFO WWW.GCPROKEY.COM ; USED TO SEPARATE ; MSL:=XXXX ; SKEY:=XXXX;
    Model= XXXXX NOT IN USE CAN BE ANYTHING.
    SerNo= 11 DIGIT SERIAL NO CAN USE HERE TO WRITE AT CERT WRITING TIME.
    IMEI=XXXXXXXXXXX IMEI 1 FOR DEVICE MUST BE HERE.
    ImeiSign=XXX SHOULD BE HERE
    PubKey=XXX SHOULD BE HERE
    PubKeySign=XXX SHOULD BE HERE
    MEID=XXXXX IF PHONE IS IMEI + MEID BASE.
    IMEI2=XXXXXX IMEI 2 SHOULD BE HERE..
    ImeiSign2=XXX IMEI 2 SIGN SHOULD BE HERE No need pubkey and pubkeysign because it's same as imei 1.
    IMEI3= XXXX IF PHONE HAVE MORE THEN 2 IMEI.
    MSL= XXXX IF HAVE MSLCODE TO USE WITH CERT WRITE.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  5. #5
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,625
    Thanks
    5
    Thanked 54 Times in 42 Posts
    • How to Update GcPro CARD for Latest version Updates
      • When GcPro Update needed ?
        • if your CARD FIRM VER := FFFF
        • if your CARD FIRM VER := 0001
        • if your CARD FIRM VER := 0002
          • Please Note: If your CARD FIRM VER := 0003 YOU MUST TRY FIRST UPDATE GCPro!!
          • Please Note: If your CARD FIRM VER := 0004 YOU DON'T(DO NOT) NEED UPDATE IT!











        • Precautions !! Read it Carefully !! if you failed to update, you may loose your GCPRO for ever !! by any Reason you managed to damaged your GCPRO we will not RESPONSIBLE
          • Make Sure GcPro is connected/Plugged directly into computer's usb port.
          • Do not Connect/Plug GcPro to USB HUB
          • If you have GcPro. Make sure you follow all above steps as well as USB cable is not more than 1 metter.
          • Make sure you use STABLE Internet. If during update internet disconnected you may lose your Gcpro.
          • Make sure you have Enough POWER BACKUP !! During Update if Computer Restarted or powered off result will be Bricked GCPRO
          • EACH GCPRO ALLOWED ONLY ONCE FOR UPDATE, DO NOT TRY TO UPDATE WITHOUT ANY REASON OR IF YOU GET ANY ERROR DO NOT TRY TO UPDATE AGAIN AND IF YOU ARE NOT SURE CONTACT WITH YOUR RESELLER FOR UPDATE
          • you do not understand any thing, we advice you do not update GCPRO to your own self. you must contact with your reseller for update.
          • Make sure no FIREWALL or ANTIVIRUS running behind & not blocked connectivity of GCPRO to it's server.
          • Make sure Windows Defender Add Folder Exclude from scan C:\GCPro_Team\ before start update or any exe.







      • I Read & Understand all & i'm updating at my OWN RISK.... Now, How to update GCPRO ?
        • Download GCPro SETUP from SUPPORT AREA
        • Open GCPro UPDATE Tool from desktop.
        • Select "Update GcPro" from list
        • Click on "Do Job"


          Picture for Reference !!
          • Common Server Problems,
            • ERR_BADCMD or SN GC00000000
              • You need to contact GCPro_support at skype with your REAL SN or last fail log.

            • ERR_USE_LATEST_UPDATE
              • You need to Download & Use Latest GCPRO Update... Support Area links already given in 1st post.

            • Card is not Allowed to UPDATE
              • If you get reply "NOT ACTIVE". you have to contact with your Reseller. Ask him to ADD serial in server for activation. Only your Reseller Can do !!!











      • In-case of any problem. Contact Us On Skype or GcproKey Facebook page or use this thread
      • In-case of any problem. you have to provide us ALL Files from
        UPDATETOOL\LOGS\ Folder
      • In-case of any problem. DO NOT DELETE ANY FILE - LOGS FROM UPDATETOOL\LOGS\ FOLDER.
      • In-case of any problem. IF YOU LOOSE/DELETE ANY FILE FROM UPDATETOOL\LOGS\ FOLDER WILL MAKE HARD FOR US FOR RECOVER YOUR CARD !!!!
      • In-case of any problem. DO NOT TRY TO UPDATE YOUR GCPRO AGAIN UNTIL WE DON'T SAY YOU FOR UPDATE !! IF YOU UPDATE YOUR GCPRO WITHOUT TELLING US RESULTS MAY LOCKED YOUR GCPRO FOREVER OR DAMAGED FOREVER !!


    Best Regards,
    Osva
    GPGIndustries
    Management Team

  6. #6
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,625
    Thanks
    5
    Thanked 54 Times in 42 Posts
    Before start please verify with *#0011# IMEICERT PASS, MIPI PASS NO ERROR ELSE YOU HAVE NETWORK ISSUE.



    • How to Unlock Samsung SM-G950U & SM-G955U Locked on Sprint with GCPRO
      • You have to confirm your Firmware version inside mobile which you want to unlock.
        • you can confirm by "ADB INFO" from GCPRO software or Dial *#1234# from Mobile and check Firmware version inside phone.

      • NOW IF your phone have
        • S1 OR U1 this means your phone have REV 1 Firmware. So,

        • S2 OR U2 this means your phone have REV 2 Firmware. So,
          • For G950U download G950USQU2AQK2 full combination from internet and flash the phone (flash complete combination file)
          • For G955U download G955USQU2AQK2 full combination from internet and flash the phone (flash complete combination file)

        • Select Sprint Unlock from GCPro software. It will Unlock your phone
        • after successful unlock. Flash Stock firmware to your phone.















    • How to Unlock Samsung SM-N950U Locked on Sprint with GCPRO
      • You have to confirm your Firmware version inside mobile which you want to unlock.
        • you can confirm by "ADB INFO" from GCPRO software or Dial *#1234# from Mobile and check Firmware version inside phone.

      • Download Latest Odin
      • Put your phone into Recovery Mode
      • Select WIPE DATA
      • DO NOT RESTART PHONE !!!
      • Select REBOOT TO BOOT-LOADER
        • if you do not follow it exactly it will stuck on logo you have to reflash stock and continue again from first step.

      • NOW IF your phone have

      • Select Sprint Unlock from GCPro software. It will Unlock your phone
      • after successful unlock. Flash Stock firmware to your phone.





    For all other phones basic steps is same You can ether root or use combination & sprint unlock option in GCPro samsung tab will unlock it.


    Note that J327P/J727P use rsa protection on U3 firmware and newer firmware may use same in future so no more unlocking for them yet do not spam with when or unlock success not unlocked etc.. such post will be deleted.


    Please do not ask us stock or combination files we do not host them you can find them via google or androidfilehost .


    Warning if you do not follow exact steps you may brick your phone you are responsible for any mistake you do.. GCPro_Team tested this steps and found no issue no knox void.. You are the one who responsible for any mistake you did we are not. so do it carefully.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  7. #7
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,625
    Thanks
    5
    Thanked 54 Times in 42 Posts
    How to unlock Samsung application locked ?
    Answer
    Please Read steps from
    http://forum.gsmhosting.com/vbb/f922...gcpro-2300486/




    Warning if you do not follow exact steps you may brick your phone you are responsible for any mistake you do.. GCPro_Team tested this steps and found no issue no knox void.. You are the one who responsible for any mistake you did we are not. so do it carefully.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  8. #8
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,625
    Thanks
    5
    Thanked 54 Times in 42 Posts
    • GCPro Troubleshooting.
    • Problem: Error 0x82 Security
      • Solution:
        • Uninstall complete GCPRO setup/update/installed files from your computer.
        • ReDownload & Install GCPRO latest setup from Support Area
        • Add C:\GCPro_Team\ folder into TRUSTZone/Exclude on your AntiVirus
        • These above steps should solve your problem. but somehow if still getting same error then you have to clean your pc from any malware & virus by any AntiMalware & AntiVirus.
        • This error only comes only when your windows is VIRUS INFECTED AND CORRUPTED GCPro ADB_SERVICE\adb.exe.




    Best Regards,
    Osva
    GPGIndustries
    Management Team

  9. #9
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,625
    Thanks
    5
    Thanked 54 Times in 42 Posts
    How to use RLOCK ADB = REACTIVATION REMOVE ON QCOM samsung device..
    Answer
    You must have STOCK 5.1 or newer .
    You must have ADB & ROOT. TEMP root also ok. use google or search in forum to get more idea how to do it. if you can't sorry no other option we have.


    We have uploaded most of ENG ROOT at support and they are latest firmware so flash your device with need firmware first.


    Scan port & select samsung modem port before start.
    Go to samsung tab select RLOCK ADB.
    Select any model GCPro do not care models at most case.
    Press start follow steps.


    In case any error please format and re do.. if still say post log by making new thread do not forget to post all log in text format no images or files please.


    Most engineering root is already at support..
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  10. #10
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,625
    Thanks
    5
    Thanked 54 Times in 42 Posts
    How to REMOVE REACTIVATION ON EXYNOS samsung device with root.
    Answer
    If you already have flashed ENG ROOT Please use FRP REMOVE (ADB) this will clear FRP & REACTIVATION & screen lock,pattern,password etc same time..


    We have uploaded most of ENG ROOT at support and they are latest firmware so flash your device with need firmware first.
    Best Regards,
    Osva
    GPGIndustries
    Management Team

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •