Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 29
  1. #11
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,412
    Thanks
    2
    Thanked 48 Times in 40 Posts
    Receive Data 0x7E Error... - Android CPU Solution



    We want to provide the solution through some hints/tips because this is not software problem but this is driver problem.
    we are starting this thread, so that the we also could be confirm by our valuable customer. So, try to connect our supporter
    if you are stuck in any point


    Check this post

    android spd cpu and need help


    Also if you find the problem like this:




    In such a case, open the "DEVICE MANAGER"





    we can see the driver name as "SPRD U2S Diag"

    "SPRD U2S Diag" driver not for SPD chip Device. So, when you try each and every time, it shows error.

    we need uninstall it and instll to sci (spd flash driver).

    open the c:\windows\system32




    And search all "sprd" and "spd" name files



    Delete all

    after del,you need use dragon software pinfind again

    after pinfind,in the driver manager will tell you install the new driver













    install the driver <7-Select SCI Driver>

    after install the driver, we can read flash file. Now, dragon successfully reads.








    Good Luck Dragon Users



    BR

    Dipendra Pathak

  2. #12
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,412
    Thanks
    2
    Thanked 48 Times in 40 Posts
    After replacing the driver read flash success Attached Thumbnails

  3. #13
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,412
    Thanks
    2
    Thanked 48 Times in 40 Posts
    en..at this time,I face some problem for the MTK stuep the driver

    I sure the Mobile is MTK CPU,and in the driver install I has select the MTK Driver

    but still error,and can't install it

    how to solve??? read this!!!!


    sample with windows XP(x86) system

    first,we open the mtk driver inf file"usb2ser_2kXP.inf"

    The device manager show you the driver name!



    now we can add the new driver info support the mtk phone hardware

    add the driver pid and vid to the info file



    after save the inf file,and install the driver again,finish

  4. #14
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,412
    Thanks
    2
    Thanked 48 Times in 40 Posts
    lso for the mtk imei driver you can edit it and support your phone


  5. #15
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,412
    Thanks
    2
    Thanked 48 Times in 40 Posts
    How to change SPD 6820 / 8810 Andorid 4 IMEI Without Root and few Click (Mobile PHone N9300)




    Read Info







    Format User Data








    How to change SPD 6820/8810 Andorid 4 IMEI Without Root and few Clicks



    1. Open SPD Tab.
    2. Connect the mobile with Dragon Main Cable and + and - power cable with it (No Battery)
    3. Tick "Scan Pinout"
    4.Choose "Write IMEI"
    5. Choose "6820 Android" Boot
    6. Choose "USB"
    7.Start
    8. Wait Yellow line when it becomes 100% and IMEI Box becomes Green and opens for IMEI write










    9. Fill the Correct IMEI that is printed on the Mobile Housing





    10. Click On "Write IMEI" and Wait
    11. Wait for message "Write (IMEI) to Mobile Done"






    12. Restart Your mobile and check the IMEI using keys *#06#

    13. Done






    We do not believe in Faith, Miracle etc, We believe in Work and we believe in GPG Dragon






    BR
    Dipendra Pathak
    Last edited by osvah; 05-06-2015 at 07:26 AM.

  6. #16
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,412
    Thanks
    2
    Thanked 48 Times in 40 Posts
    Windwos 7 / 8 Box Driver, Box firmware and Device (Mobile) Drivers
    This Is Last Driver Update;more stable support your Box(all with Pl2303 IC Driver)

    Click Download Pl2303 V1.8.0 Driver in 4shared

  7. #17
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,412
    Thanks
    2
    Thanked 48 Times in 40 Posts
    How to change 625a CPU IMEI with USB Cable with Dragon box?

    1.Select "MTK"
    2.Select "Write IMEI"
    3.Mobile option "COM" switch to "USB"
    4.Click "Start"
    5. Now, Insert Battery to the mobile and Connect USB Cable to the Computer
    6. Now, software shows you Original IMEI
    7. Write any valid IMEI to the software's IMEI Box
    8.Click "write imei"
    9. Done
    Last edited by osvah; 05-06-2015 at 07:26 AM.

  8. #18
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,412
    Thanks
    2
    Thanked 48 Times in 40 Posts
    How to remove Password from Mstar CPU (Phone) ?


    This function makes the flash file passwordless. This means when you use this option, then, Dragon removes the password and saves new passwordless file to the computer. Now, you have to write this file to the mobile again.

    1. Open the Dragon software
    2. Click on "CheckBox"
    3. Now, go to "Mstar" Tab
    4. Choose option as "Read Password"
    5. After this, you will see a box called "Clear_code". Tick the "Clear_Code"
    6. Now, Choose the file name you want to save.
    7. Click "Start"
    8. Wait until the flash file is fully read by Dragon Box
    9. Now, you need Write this Flash File File to the Device
    10. Wait until the flash file written.
    11. Done. Now, your device is passwordless
    Last edited by osvah; 05-06-2015 at 07:26 AM.

  9. #19
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,412
    Thanks
    2
    Thanked 48 Times in 40 Posts
    How to Spice M5460 MT6250/20 Touch Pad Calibration With the help of Dragon Box


    1. Open Dragon Old Version Software 2.13
    2. Connect Box
    3. Choose "Tracker" Choose "Boot Version" and Click "Start"



    4. Press and Hold Power button until software tells you to release.

    5. Now, Choose "Restore Settings"




    6. Click on "Restore"




    7. Now, Choose Calibration Data "6253.cci" and Click on "Open"
    8. Software shows you error but don't worry, it works.




    9. Again Click on "Restore"
    10. Choose Calibration Data "calibration titan.cci" and Click on "Open"
    11. software shows you an error but doesn't matter, it works.
    12. Again Click on "Restore"
    13. Once more time, Choose Calibration Data "MTK6225.cci"
    14. software shows you an error but doesn't matter, it works.
    15. Again Click on "Restore"
    16. Finally, Choose Calibration Data "MTK 6223.cci" and Click on "Open"
    17. software shows you an error but doesn't matter, it works.
    18. Done.



    Video Tuterial + Touch CCI file Download Link:

    http://www.4shared.com/rar/x97Bc_w3/...th_Dragon.html

    NOTE: No need to do all the data at the same time because touch data can hang the mobile and not function the touch even you calibrate it. I did it because Customer wants to see the functional Screen or needs new mobile from my site. Because it was happened when I reset the mobile and could not calibrate from any other devices.
    Last edited by osvah; 05-06-2015 at 07:26 AM.

  10. #20
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,412
    Thanks
    2
    Thanked 48 Times in 40 Posts
    HOW TO WRITE IMEI of MTK ANDROID MOBILE 6575 etc.



    1. Power ON the device (Mobile)
    2. Tick "Development" Option.
    3. Now, Switch the mobile Off
    4. Take out the battery and re-install the battery to the device.
    6. Now, Open Dragon Software
    7. Choose Dragon Box Port
    8. CheckBox (Box Connects in Specif port)
    9. Un-tick "Scan Pinout" If you are doing with USB cable + Battery
    10. Choose "Write IMEI" in MTK tab
    11. Choose "USB" (not COM)
    12. Tick "Android IMEI"
    13. Click "Start"
    14. Wait and let the mobile install necessary drivers.
    15. Now, you can see, yellow lines running in the button. Wait until it finish 100%
    16. Now, IMEI Box Opens in Blue colour.
    17. Write the IMEI that is written in the mobile housing.
    18. Click "Write"
    19. Now, Connect the USB cable to the Computer
    20. Waits until you see "Successfully Done"
    21. Done
    Last edited by osvah; 05-06-2015 at 07:25 AM.

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •