Page 3 of 3 FirstFirst 123
Results 21 to 29 of 29
  1. #21
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,425
    Thanks
    2
    Thanked 49 Times in 40 Posts
    HOW TO Remove Pattern Lock of SPD Android Mobiles ie SPD 6820/8810.




    BATTERY + USB Cable Way



    1. Switch the mobile Off
    2. Take out the battery and re-install the battery to the device.
    3. Now, Open Dragon Software
    4. Choose Dragon Box Port
    5. CheckBox (Box Connects in Specif port)
    6. Go to "SPD" Tab
    7. Un-tick "Scan Pinout" If you are doing with USB cable + Battery
    8. Choose "Format"
    9. Choose Mobile Option "6820_Android"
    10. Choose Use Option as "Format"
    11. Tick "Format_UserData" (DO NOT Select Format_RuntimeNV, Format_Cache, Format_Misc)
    12. Choose "USB" (not COM)
    13. Click "Start"
    14. Now, Press the Boot Key and Connect the mobile to the computer with the help of USB Data Cable.

    Note: Boot Key might be Volume Down or Home Butten etc.

    15. Wait and let the mobile install necessary drivers.
    16. Waits until you see "All Done"
    17. Done










    MAIN CABLE and +/- of Main Cable Way (No Battery)



    1. Switch the mobile Off
    2. Connect the Mobile with the help of Dragon MAIN CABLE + DRAGON +/- wire (Not from Battery)
    3. Now, Open Dragon Software
    4. Choose Dragon Box Port
    5. CheckBox (Box Connects in Specif port)
    6. Go to "SPD" Tab
    7. Tick "Scan Pinout" If you are doing with USB cable + Battery
    8. Choose "Format"
    9. Choose Mobile Option "6820_Android"
    10. Choose Use Option as "Format"
    11. Tick "Format_UserData" (DO NOT Select Format_RuntimeNV, Format_Cache, Format_Misc)
    12. Choose "USB" (not COM)
    13. Now, Press the Boot Key and Click on "Start".

    Note: Boot Key might be Volume Down or Home Butten etc.

    14. Waits until you see "All Done"
    15. Done
    Last edited by osvah; 05-06-2015 at 07:25 AM.

  2. #22
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,425
    Thanks
    2
    Thanked 49 Times in 40 Posts
    HOW TO Remove Pattern Lock of MTK Android Mobiles ie MTK 6575 etc.





    BATTERY + USB Cable Way



    1. Switch the mobile Off
    2. Take out the battery and re-install the battery to the device.
    3. Now, Open Dragon Software
    4. Choose Dragon Box Port
    5. CheckBox (Box Connects in Specif port)
    6. Go to "MTK" Tab
    7. Un-tick "Scan Pinout" If you are doing with USB cable + Battery
    8. Choose "Format"
    9. Tick "Auto Format" if you don't know the Manual Format Address
    10. Choose "USB" (not COM)
    11. Click "Start"
    12. Now, Press the Boot Key and Connect the mobile to the computer with the help of USB Data Cable.

    Note: Boot Key might be Volume Down or Home Button etc.

    13. Wait and let the mobile install necessary drivers.
    14. Waits until you see "All Done"
    15. Done








    MAIN CABLE and +/- of Main Cable Way




    1. Device must be ticked "Development" Option.
    2. Connect Mobile with GPG Dragon Main Cable and +/- Cable from Main Cable (for power supply)
    3. Now, Open Dragon Software
    4. Choose Dragon Box Port
    5. CheckBox (Box Connects in Specif port)
    6. Go to "MTK" Tab
    7. Tick "Scan Pinout" If you are doing with Main Cable + Dragon Cable Power Supply (NO Battery)
    8. Choose "Format"
    9. Tick "Auto Format" if you don't know the Manual Format Address
    10. Choose "USB" (not COM)
    11. Now, Press the Boot Key and Click on "Start"

    Note: Boot Key might be Volume Down or Home Button etc.

    12. Wait and let the mobile install necessary drivers.
    13. Waits until you see "All Done"
    14. Done


  3. #23
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,425
    Thanks
    2
    Thanked 49 Times in 40 Posts
    How to Repair MTK IMEI With USB Method


    WIth the help of Dragon Main Cable + Main cable Power supply (Do not use Battery )

    1. Open the Dragon Software
    2. Choose "MTK" tab
    3. Tick "Scan Pinout"
    4. Choose "USB" (NOT COM Port)
    5. Now, Connect the Device With Dragon MAIN CABLE and its power cable (NOT Battery and USB cable)
    6. Click on "Start"
    7. Wait until the Yellow mark goes to 100% and turn Green
    8. Write Valid IMEI
    9. Click on "Write IMEI"
    10. Wait until IMEI Written.
    Done



    WIth the help of USB Cable and Battery (Do not use Dragon Main Cable and Power supply)


    1. Open the Dragon Software
    2. Choose "MTK" tab
    3. Untick "Scan Pinout"
    4. Choose "USB" (NOT COM Port)
    5. Click on "Start"
    6. Insert Battery + USB Cable and now connect to the computer
    7. Wait until the driver installed
    8. Now you will see Yellow mark goes upto 100% and it turns Green
    9. Write Valid IMEI
    10. Click on "Write IMEI"
    11. Wait until IMEI Written.
    Done


    NOTE: Sometimes you must ON Device, and choose Device Diagnostics Port to repair IMEI.


    STILL IMEI NOT CHANGING WHAT IS THE PROBLEM?

    Sometimes You changed the IMEI of 6252 (MTK) using Dragon Box, Still IMEI not changing, in such a case, follow the methods:

    1. Backup the flash file of the mobile
    2. Save it to the hard disk or portable device
    3. Write it back to the Device (Mobile)
    4. Check the IMEI
    5. Done

    Please USE only USB Method. COM method not supported yet.





  4. #24
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,425
    Thanks
    2
    Thanked 49 Times in 40 Posts
    Dragon Triple three {333} BOX drivers .
    MTK USB
    SPD USB
    ANDRIOD SPD USB
    COOLSAND USB

    Download

  5. #25
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,425
    Thanks
    2
    Thanked 49 Times in 40 Posts
    Dragon Old Version

    Version 26


    http://www.4shared.com/rar/qSvmZtua/...agon_v326.html


    Version 3.33


    http://www.4shared.com/rar/fkjEaa9f/gpg_dragon_333.html




    Box Firmware



    http://www.mediafire.com/download/vj...mware+1.65.rar




    How to Upgrade Box Firmware




    Click to View - How to upgrade Dragon Firmware





    How to solve the Problem of Updating the Box firmware



    GPGDragon Firmware Update Guide


    BR

    Dipendra Pathak

  6. #26
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,425
    Thanks
    2
    Thanked 49 Times in 40 Posts
    MTK Android ""Return Data Error !!!"" Solution Here..




    If you receive this error message

    Used GPGDragon Main Cable D+ D- (pinfind)

    Quote:
    1- Run GPGDragon Exe
    2- Checkbox
    3- Tick Scan pinout
    4- Choise USB
    5- Click Start



    And Enjoy The GPGDragon Box

  7. #27
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,425
    Thanks
    2
    Thanked 49 Times in 40 Posts
    How to Remove Pattern Lock of Android MTK device (NOT ANDROID SPD) without USB Debugging and without Loosing User Data with Battery and Normal Cable


    If your device not connected in ADB Mode, that mean your device "USB DEBUTTING" is OFF. So, you can not connect your device in ADB Mode. For this you have some idea or trick.


    1. Connect your Switch OFF Android Device (Mobile) with Normal USB Cable and Battery (Do Not USE Modified Cable)





    Now, If you see in the "Device manager" You can see like above picture because the DEVICE "USB DEBUGGINE" is OFF.

    2. Now, Open Dragon Software in MTK Tab
    3. Now, choose "Write IMEI"
    4. Tick "Android IMEI"
    5. Choose "USB" (Not Com port)
    6. Now, Click on "Start"
    7. Wait.....Now, you can see the IMEI of the Device on the Dragon Main Screen / Output Screen.





    8. This means, Device is connected in ATE Mode now. And now, device also connects in ADB interface.
    (To confirm this, Check the "Device Manager" of you computer. You can see "Device Name ie Samsung Android Phone" in first row and "Android Composite ADB Interface" in the second row.)







    9. Now, go to Dragon "Android" Tab (Do not disconnect device from the computer. Let it be connected.)
    10. Choose "Clear Pattern Lock by ADB"
    11. Click "Start"





    12. Wait until you see "All Done" in the Dragon Software Main Screen.
    13. Now, Device will Restart.
    14. Now, you can draw any kind of Pattern you like. Your device will open.
    15. Enjoy!!!



    Note: This method only works "Android MTK Devices", Not for "Android SPD Devices". And this method only not for Chinese Devices but Also Original Devices that is available in the Market. )

  8. #28
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,425
    Thanks
    2
    Thanked 49 Times in 40 Posts
    How To use 4 REGULAR jIG For MTK SPD RDA COOLSAND

    For Daily Info About These jigs
    This Is tooo old but Mostly Users Not know this
    So Team Decide To Make Easy For Dragon Users

    daily many users again and again
    use wrong way of these jig
    and post again and again
    you can set these as manul pinout for coolsand rda
    then your file readed ok and working 100%
    P-05B

    Every One Know This jig
    But Not know how to use right way
    of this ji

    This jig is for MTK SPD MSTAR COOLSAND
    AND Many Others Brands
    also pinout same
    this jig have 5 pin
    USB
    1:- VCC CH
    2:- D- DM
    3:- D+ DP
    4:- EMPTY
    5:- GND
    RX TX
    1:- VCC
    2:- RX
    3:- TX
    4:- Empty
    5:- GND

    P-10C



    this jig is
    For MTK SPD MSTAR COOLSAND RDA
    ZTE HUAWIE AND MANY OTHERS BRANDS
    BUT WE POST ABOUT COOLSAND PINOUT
    D-=8
    D+=6
    RX 7
    TX 9
    RXD 3
    TXD 4


    P-12C



    IN THIS JIG
    FOR RDA COOLSAND
    RX 6
    TX 7

    For SPD
    D+:9
    D-:8


    Universal JIG




    NOT only for RX or TX
    u can use Uni jig for
    USB
    as
    D+ D-
    DP DM


  9. #29

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •