2600c successfully flashed

Code:
Initializing FBUS...
All initialized - Ready to work
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.22.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 846512A58D78F69B88074F0AE0
MSID-Plain: 2C40BAE9004C313DA8000000
FAID-Crypted: BF4D3163FE5588FC5BE1D8AE
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01C3FFFF]
Erase taken 45.736s
Writing 344 blocks...
All blocks written OK! Time taken 382.260s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.22.image_ei, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84E532F723441EF8FD29D1B426
MSID-Plain: D26EBAF1004C313DAA000610
FAID-Crypted: 23DA5045D918BA2ED5CA78CC
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02000000-0x02DBFFFF]
Erasing NOR Region [0x02DC0000-0x02F9FFFF]
Erase taken 46.226s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 216 blocks...
All blocks written OK! Time taken 94.907s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.22.ppm_ei, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 84DAB6B25887D312D38E5057E3
MSID-Plain: 3E4EBAE9004C313DA8000000
FAID-Crypted: 504B461EB53F428459579FBE
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C40000-0x01FFFFFF]
Erase taken 11.857s
Writing 85 blocks...
All blocks written OK! Time taken 80.536s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK