-
-
-
-
-
How to repair dead Lumia WP7.x phones:
- Solder Test Point wires to Lumia
- Select Model from Windows Phone tab
- Make sure Correct Phone Type is selected on "TP Services" tab
- Click on "Test Connection" button to check TP connection
- And wait until the ATF Software will tell you to Connect the USB cable
- Once your Lumia is Detected
- Check to: M.B.R. (Master Boot Record), SEC_BOOT and OSBL DLOAD (Nokia)
- Click on "REPAIR BOOT" button
-
-
Possible errors during lumia phones unlock and it's solutions:
Error log from software:
Code:
ERROR: Dump Aborted, Too Much Read Failures!
Solution:
1. Check for short circuit on TP area
2. Try with ATF Nitro/Lightning, this error mostly with ATF Big Box
3. Using ATF Big Box change boot-loader to OSBL QCOM and unlock via USB cable from eMMC Direct tab
X. for boot-loader change, check previous post!
Error log from software:
Code:
WARNING: Patch Bit NOT FOUND!
Maybe Phone is already UNLOCKED!
Solution:
Flash your lumia phone with latest available version and unlock again
Error log from software:
Code:
Dumping AMSS FAT16 Region
Please wait for 2-4 Minutes...
ERROR: FAT16 Header Not Found!
Solution:
ATF software could not find a point to patch on inside firmware.
In this case, you need to flash phone with latest available version
and do unlock again!
-
-
How to repair dead Lumia 505, 510 and 610 phones:
- Solder Test Point wires to Lumia
- Select Model from Windows Phone tab
- Make sure Correct Phone Type is selected on "TP Services" tab
- Click on "Test Connection" button to check TP connection
- And wait until the ATF Software will tell you to Connect the USB cable
- Once your Lumia is Detected
- Check to: M.B.R. (Master Boot Record), SEC_BOOT, OSBL DLOAD (Nokia) and QCSBL
- Click on "REPAIR BOOT" button
- If phone still dead, then need to flash the phone via USB cable
-
-
How to Restore OSBL DLOAD for Lumia WP 7.x only:
- Select Model from Windows Phone tab
- Go to "eMMC Direct" tab
- Press VOL UP and connect USB cable to powered off phone
- Click on "Scan Partitions"
- Click on "Restore DLOAD"
Now phone will be able to take flashing by ATF or any othe Nokia software....
-
-
umia supported models for Dead Boot Repair via eMMC Test Points and ATF Software:
Nokia Lumia WP7x:
- Lumia 505 (RM-923) - World's first
- Lumia 510 (RM-889, RM-898) - World's first
- Lumia 610 (RM-835, RM-849) - World's first
- Lumia 610C (RM-836) - World's first
- Lumia 710 (RM-803, RM-809) - World's first
- Lumia 800 (RM-801, RM-819) - World's first
- Lumia 800C (RM-802) - World's first
- Lumia 900 (RM-808, RM-823) - World's first
Nokia Lumia WP8:
- Lumia 520T (RM-913) - World's first
- Lumia 520 (RM-914) - World's first
- Lumia 520 (RM-915) - World's first
- Lumia 521 (RM-917) - World's first
- Lumia 620 (RM-846) - World's first
- Lumia 720 (RM-885) - World's first
- Lumia 720T (RM-887) - World's first
- Lumia 810 (RM-878) - World's first
- Lumia 822 (RM-845) - World's first
Nokia Android:
- Nokia X (RM-980) - World's first
Samsung Phones:
- GT-I9300
- GT-N7100
- SM-G900H - World's first
XiaoMi Phones:
- XiaoMi Mi2s - World's first
- XiaoMi Mi3w - World's first
Cherry Mobiles:
- Cherry Mobile Flare S100 - World's first
-
-
How to know what version inside a dead phone ???
From ATF V9.83 it is available to know the firmware version even in a dead / semi dead phone
See this - Some Phones Tested with ATF 9.83 (Showing Firmware Version)
Now there is ZERO possibility of accidentally downgrade for Nokia BB5 SL3 phone
Use ATF & feel the power
-
-
How to repair Lumia WP8 dead boot:
- Solder Test Point wires to Lumia
- Select Model from Windows Phone tab
- Make sure Correct Phone Type is selected on "TP Services" tab
- Click on "Test Connection" button to check TP connection
- And wait until the ATF Software will tell you to Connect the USB cable
- Once your Lumia is Detected
- Click on "REPAIR BOOT" button
- If phone still dead, then need to flash the phone via USB cable
-
-
How to unlock Lumia 710 and 800:
- Solder Test Point wires to Lumia
- Select Model from "Windows Phone" tab
- Make sure Correct Phone Type is selected on "TP Services" tab
- Click on "Test Connection" button to check TP connection
- And wait until the ATF Software will tell you to Connect the USB cable
- Once your Lumia is Detected
- Press "SP Unlock" button
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules