ATF-V2 All in 1 Ultimate Adaptor For ATF BIG BOX/Nitro/Lighting


CLICK TO BUY ONLINE
ATF-V2 All in 1 Ultimate Adaptor For ATF BIG BOX/Nitro/Lighting


ON = Strong PULL-UP Resistors will be applied to eMMC CMD (BLUE) and DATA (GREEN) Lines.
---> This is very usefull for phones that require VccQ and Vcc Power Connections (Samsung, HTC etc)
OFF = PULL-UP Resistors WILL NOT be used.
---> This is normally done with Nokia Lumia Phones which does not require VccQ and Vcc Connections
For a more stable connection, set switch to "ON" and make sure to connect required power to VccQ and Vcc Lines


3.3v = Most New/Old Micro SD Cards are Compatible with 3.3v Vcc
1.8V = We have prepared a 1.8v Vcc for Future Low-Powered Micro SD Cards

[For eMMC Use Only]
NC = Secondary CLOCK will not be used for eMMC Communication
CLK2 = Secondary CLOCK will be used for eMMC Communication

When adapter is used for a NON-EMMC Connection such as JTAG or Micro SD Card, make sure
this DIP Switch is on the "NC" Position.

CLK2 is NOT REQUIRED for most eMMC Chips, but setting DIP SWITCH to CLK2 will give you
a stronger CLK (RED) Signal for better eMMC Communication.






CLICK TO BUY ONLINE
ATF-V2 All in 1 Ultimate Adaptor For ATF BIG BOX/Nitro/Lighting


FOR RESELLER CONTACT ME
EMAIL : asmartgsm@gmail.com
WHATSAPP : +8615814039536