Results 1 to 4 of 4
  1. #1
    Board of Directors
    Join Date
    Apr 2015
    Posts
    5,624
    Thanks
    5
    Thanked 60 Times in 48 Posts

    [ Manual Here ] Convert F180 S/K/L to E975 LG Optimus G

    F180 S/K/L is the Korean version of E975, LG Optimus G. Both of these models have got exactly the same hardware except that F180 also supports LTE. F180′s original official firmware is great for use in Korea but for those who are using F180 in other parts of the world, and for those who arent Korean, it can be a pain to use F180 with official Korean firmware at times.
    LG_Optimus_G



    Just like all other Korean phones, SMS is limited to 90 characters and you will not be able to send larger texts than that. Also, there is a lot of carrier specific bloatware in the official firmware. The default dialer is also a bit unpleasant to the eyes as it displays Korean characters on every dialer key. There is also the old, famous, Call to Korea problem.

    Those who have used any Korean smartphone previously will easily understand what I am talking about. So, converting your F180 S/K/L to E975 will get rid of all of the regional problems for you. Also, as well be flashing the official E975 firmware, it will be rock-solid unlike most of the custom roms and you will also be receiving automatic updates over WiFi.
    Guide


    Regardless of which firmware you are currently running on your F180, you will need to download and switch to the corresponding one from the list below:


    F180S : F180S20B_00.kdz
    F180K : F180K20B_00.kdz
    F180L : F180L20H_00.kdz
    Tip: You can find your phones model by going to Settings > About > Phone identity in Android.
    Warning: Make sure your phones battery is at least charged 80%. Dont proceed otherwise as LG Optimus G comes with non-removable battery and thus you wont be able to easily swap the battery if it dies in the middle of the process.
    It is mandatory that you factory reset your phone before proceeding. For doing so, go to Settings > Privacy > Factory data reset. Please keep in mind that doing so will wipe your phone including contacts, messages, mails, applications and all the data on your phones internal storage. Your phone will reboot twice. Let it boot after factory reset. Once you are on the language selection screen, power off your phone
    Press and hold down Volume Up + Volume Down and while inserting USB cable in to the phone. This will get you to S/W download mode on LG F180.
    Now you need to flash the firmware you downloaded earlier. Please refer to the guide here:
    How to: Download and Install KDZ LG firmware All Android models
    Once the KDZ firmware is successfully flashed, your phone will reboot automatically. Once it fully boots up, go through the setup procedure and again factory reset it as you already did once.
    Once you are on the language selection screen, power off your phone
    Once again, put your phone in download mode



    For converting your phone to E975, well be flashing this E975 Hong Kong KDZ:
    http://csmgdl.lgmobile.com/swdata/WD...E97510C_00.kdz
    Follow the same procedure for flashing KDZ as you did earlier.
    Once the KDZ flash is successful, go through the set-up procedure. Now go to Settings > Storage and make sure your internal storage is being listed there. If it shows 0.00 GB there, dont panic. Power off your phone. Once completely off, press and hold down Volume Down + Power buttons until the phone displays a hard reset screen. Release Volume Down and press Power twice for resetting your phone.
    Your phone will reboot once again and your phones internal storage will be back to normal.
    Now you need to root your phone. Please refer to our LG Optimus G universal rooting guide here:
    Universal root for LG Optimus G Any firmware
    Once you are done with rooting process, make sure you reboot your phone at least once if it doesnt reboot automatically.
    Now we will be flashing LG F180 baseband. Download your corresponding baseband backup from the list below:


    F180S Baseband
    F180K Baseband
    F180L Baseband


    Unzip the downloaded archive and you will find a batch file named modem-flash inside it. Make sure USB Debugging is enabled on your phone and your phone is in Charge only mode while connected to the PC. Run the modem-flash batch file.
    Keep an eye on your phone screen as you will need to tap the grant permission button on SuperSU pop-up. If you miss the pop-up as it expires after 10 sec, run modem-flash batch file again.
    Once the baseband has been flashed successfully, reboot your phone
    Congratulations! You have just converted LG F180 to LG E975.


    Other E975 Firmwares

    Theoretically, flashing any of the E975 firmware from the page linked below should work for you. However we have not tested with any of these and cant guarantee your success. If you feel brave enough, you can try to flash any of these firmwares on F180:
    Official Stock LG Optimus G Firmware / Rom - LG Cell Phones Blog
    Best Regards,
    Osva
    GPGIndustries
    Management Team

  2. #2
    Junior Member
    Join Date
    May 2022
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    juliya want to video call >>>> Visit Here Cowboy

  3. #3
    Junior Member
    Join Date
    May 2022
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Fatima is alone chatt now >>>>> HOT CHILLI CLICK HERE

  4. #4
    Junior Member
    Join Date
    May 2022
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Loan is here >>>> CLICK Here Visit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •