Octoplus JTAG Software v.1.9.1 is out!

We have added Boot Repair via USB and small TP for LG E970, LG H220 and via JTAG for Huawei G525-U00, HTC One M7 (PN07110)!

Octoplus Box JTAG Software v.1.9.1 Release Notes

  • Added support for the following models:

- LG E970 - added Dead Boot Repair via USB
- LG H220 - added Dead Boot Repair via USB
- Huawei G525-U00 - added Dead Boot / Device Repair via JTAG
- HTC One M7 (PN07110) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)
  • All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG E970 and LG H220 via USB, please follow the next three steps:

  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
    (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
    Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)



Find out more at: www.octoplusbox.com