Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2011
    P A K I S T A N
    Thanked 83 Times in 47 Posts

    BB5 Broadcom Unlock ATF v7.90 Update!! Public Discussion Thread:

    BB5 Broadcom Unlock !! First In The World!!

    *Decrypt PM 120 HASHES for ALL Broadcom BB5 Phones
    *Bruteforce Unlock for ALL Broadcom BB5 Phones (via ATF Server or via LBF Servers)
    *Stand Alone Super Dongle Repair for ALL Broadcom BB5 Phones
    *Stand Alone SX-4 Authorize for ALL Broadcom BB5 Phones
    *Full Phone Authorization via ATF Network for ALL Broadcom BB5Phones
    *Read FULL NAND Chip Flash for ALL Broadcom BB5 Phones

    Now The ATF Network Supports ALL BB5 CPUs Released By Nokia!!!

    Here is a List of Broadcom Based BB5 Phones:

    C3-00 RM-614
    X2-00 RM-618
    X2-01 RM-709
    X2-03 RM-709
    X2-01.1 RM-717
    2710c RM-586
    7020 RM-497

    ************************************************** ********************************
    ************************************************** ********************************

    1. Since NO other team can even Dream of releasing Broadcom Loaders before ATF Team, all Broadcom Phones Authorized by The ATF Network will require 5 ATF Network Credits.

    *** Note that it requires 5 ATF Network Credits and NOT 5 SL3 BF Credits...

    2. You NEED ATF Network Activation in order to:

    a. Authorize Phone
    b. Decrypt PM 120 Hashes for BF Unlock
    c. Stand Alone Super Dongle RPL Repair
    d. Stand Alone SX-4 Authorize

    3. You DO NOT NEED ATF Network Activation if you just want to:
    a. Read FULL NAND Flash Chip and extract files etc...

    4. If you Authorize a Broadcom Phone more than 1 time, then you will be charged and charged again and again and again with 5 credits each time.

    5. Some Broadcom Phones will get stuck when Reading Phone info in Normal Mode. The correct way to do it is to change phone mode to TEST MODE before attempting to Decrypt PM 120 HASHES, Super Dongle Repairs etc...

    Here is a QUICK way on How to Correct Set a Broadcom Phone into TEST MODE from Normal Mode (RF Inactive) Condition.

    a. Put Battery to Phone and Power it On
    b. Connect USB Cable and Connect to PC
    C. Wait while Windows is Installing the Drivers...
    d. Go to ATF Software "Settings" --> "Nokia Settings"
    --> Put a check on "Skip Full Phone Information Sweep for BB5 Phones"
    e. Go back to "Nokia Service" and click Scan Phone...

    *** Once the phone is detected, you can select "Test" on that DropDown
    list on the LEFT SIDE of "Backup RPL" Button. This will make your
    Phone enter into TEST MODE....

    ************************************************** ********************************
    ************************************************** ********************************
    ************************************************** ********************************

    What Else Is New?

    N900 FIASCO Flashing has been moved from iTablets into the BB5 Section.
    --> Now you can Flash N900 just like any other BB5 Phone... Super EASY!
    --> The Current MAEMO Flash ENGINE does not support EMMC (VANILLA) Flashing Yet, this will be Ported on the Next Update.

    What was Fixed?

    1. Infineon Self Test Hang on Exit: FIXED!
    2. Box Activation (Activate New Box) FIXED!

    Whats Up?
    Try using the XFactor.skn skin... it Rocks!

    Who will buy this if you can get more in ATF?

    Buy only from ATF [Advance Turbo Flasher] authorized resellers:
    ATF [Advance Turbo Flasher] Authorized Distributors and Resellers List

    ATF [Advance Turbo Flasher] official web sites:
    International -

    The Master Piece

    Last edited by Gsm-Rocky; 11-04-2011 at 06:21 PM.

  2. #2
    Join Date
    Nov 2011
    P A K I S T A N
    Thanked 83 Times in 47 Posts

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts