Good News Dragon 2.12 ready(beta test started)

[r-jcomm]

Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
RXD=7 TXD=9
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000506A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_FM25Q32
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.

[Only registered and activated users can see links. ]

[jhoper]

thanks gpgteam to update the dragon box...nice job...keep support this product.

[vinodsfd]

thanks bro .........carry on

[yungstarmobile]

thanks gpgteam to update the dragon box

[javad_sat]

nothing improved
nothing changed !!!!!!!!!!!!!!!!!!

[Only registered and activated users can see links. ]

[haq nawaz12]

Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
RXD=14 TXD=10
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000086A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_GD25Q32
setting the Flash Parameters...
Failed to set Flash parameters...

[raja6061]

bro failed to set parameters problem cange buad rate 115200.i hope problem will solved.

[raja6061]

not good for all gpg 2.12 setup.my yxtel c6 not supported also this setup.gpg team need hard work.i m not happy for this team.

[randello]

good update gpgdragon team....

[dolphin_egypt]

[Only registered and activated users can see links. ] you