Code:
Connect phone on selected interface... 

 Press and hold "U" button and insert cable! (Ignore if phone Connected) 
 Waiting for NOLO... 
 Connect in NOLO mode Ok! 

 Phone Info : 
 Type : RX-51 , HWRev : 2204 
 NOLO : 01/0E/14 
 SWVer: RX-51_2009SE_20.2010.36-2_PR_MR0 
 Device mode : Production mode 

 Read info Ok 

 Press and hold "U" button and insert cable! (Ignore if phone Connected) 
 Waiting for NOLO... 
 Connect in NOLO mode Ok! 

 Phone Info : 
 Type : RX-51 , HWRev : 2204 
 NOLO : 01/0E/14 
 SWVer: RX-51_2009SE_20.2010.36-2_PR_MR0 
 Device mode : Production mode 

 Read info Ok 


 Processing NOL part 
 File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin 
 Processing : xloader , 1.4.14.9+0m5 
 Processing : secondary , 1.4.14.9+0m5 
 NOL part Ok, boot flash done 

 Processing APE part 
 File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin 
 Processing : kernel , 2.6.28-20103103+0m5 
 Kernel flash Ok 

 Processing APE part 
 File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin 
 Processing : rootfs , RX-51_2009SE_21.2011.38-1_PR_MR0 
 RootFs flash Ok 

 Processing CMT part 
 File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin 
 Processing : cmt-2nd , BB5_09.36 
 Processing : cmt-algo , BB5_09.36 
 Processing : cmt-mcusw , rx51_ICPR82_10w08 
 CMT part prepare Ok, files are sent 
 Program CMT request Ok 

 Switch  : OSSO UART+USB 
 Version : RX-51_2009SE_21.2011.38-1_PR_MR0 
 Switch CMT request Ok 
 CMT : Erasing... 
 CMT : Program... 
 CMT : Program Finished! 

 Executing PostFlash : RX-51_2009SE_21.2011.38-1_PR_MR0 
 Executing PostFlash : Reset RD Flags 
 Executing PostFlash : Reboot 

 Done! 

 Elapsed: 00:01:46 
 Connect phone on selected interface... 

 Phone found! 
 Series 60 Device detected! 
 read info...  - Ok